Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...

The corrosion mitigation efficiency of biotin drug for mild steel in 15% hydrochloric acid was thoroughly investigated by weight loss and electrochemical methods. The surface morphology was studied by the contact angle, scanning electrochemical microscopy, atomic force microscopy and scanning electron microscopy methods. Quantum chemical calculation and Fukui analysis were done to correlate the...

The inhibition effect of N-benzyl-N′-phenyl thiourea (BPTU) on the corrosion of mild steel in 0.01 and 0.05 N HCl medium has been investigated by potentiostatic polarization technique. Results obtained reveal that BPTU is an efficient anodic inhibitor with greater than 94% of efficiency in the range of temperature studied. The adsorption of inhibitor on the mild steel surface obeys the Temkins’...

Corrosion inhibitory impacts of turmeric with concentrations of 200-800 ppm on the electrochemical behavior of mild steel were studied in the medium of NaCl 3.5% using several techniques such as electrochemical impedance spectroscopy (EIS) and polarization. Scanning electron microscopy (SEM) was used for analyzing the surface of mild steel after 24 hours of immersion in the electrolyte solution...

UNLABELLED BACKGROUND The corrosion inhibition performance of pyrazolylindolenine compounds, namely 4-(3,3-dimethyl-3H-indol-2-yl)-pyrazole-1-carbothioamide (InPzTAm), 4-(3,3-dimethyl-3H-indol-2-yl)-1H-pyrazole-1-carbothiohydrazide (InPzTH) and 3,3-dimethyl-2-(1-phenyl-1H-pyrazol-4-yl)-3H-indole (InPzPh),) on copper in 1M HCl solution is investigated by electrochemical impedance spectroscopy...

A combined process was developed to inhibit the corrosion both in the pipeline of reclaimed water supplies (PRWS) and in downstream recirculating cooling water systems (RCWS) using the reclaimed water as makeup. Hydroxyl carboxylate-based corrosion inhibitors (e.g., gluconate, citrate, tartrate) and zinc sulfate heptahydrate, which provided Zn(2+) as a synergistic corrosion inhibition additive,...

the Corrosion inhibition of mild steel in 1 M HCl has been investigated using three dendrimers by means of gravimetric, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, scanning electron microscopy (SEM) and energy dispersive Xray spectroscopy (EDX) techniques. Results showed that inhibition efficiency increases with increasing concentration of dendrimers. Among the s...

Imidazoline obtained from the essential oil contained in Pouteria sapota seed was tested as an environmentally-friendly corrosion inhibitor of 1018 carbon steel CO2 saturated 3.5 % NaCl solution using electrochemical techniques. This imidazoline contains fatty acids with presence long hydrophobic chains, 52.73 unsaturated (oleic and linolenic acids) 40 (palmitic myristic compounds. Polarization...

Aluminum AA5052 is an inexpensive and lightweight metal that has been used in a variety of applications, including the Bipolar Plate Proton Exchange Membrane Fuel Cells (BPs PEMFC). The alloy good electrical conductivity low corrosion. Corrosion rate (CR) increases during PEMFC operation with increasing temperature. Inorganic dyes, such as chromate, are commonly to reduce Unfortunately, they to...

The impact of pre-corrosion on the performance an imidazoline-based corrosion inhibitor was evaluated with respect to inhibition uniform and localised in CO2-environments. Corrosion protection found be a function two factors, adsorption/film formation presence products. This effect most significant continuous FeCO3-rich layer high coverage steel surface, resulting only providing ?25 % overall a...