The corrosion resistance of a Magnesium alloy is low and needs to be improved. This research aimed at corrosion-resistance improvement by supatterd deposition aluminium film, which is formed on the surface of AZ91 Magnesium-alloy. Corrosion resistance performed polarization curve measurement, was evaluated in quest of the corrosion rate using the Tafel extrapolation method, and conducted surfac...

Pitting corrosion due to microbial activity is the most severe type of corrosion that occurs in ship hull. Since biogenic sulfide produced by sulfate-reducing bacteria (SRB) is involved in the acceleration of pitting corrosion of marine vessels, so it is important to collect information about SRB community involved in maritime vessel failure. We investigated the SRB community on corroded hull p...

Diamond-like carbon (DLC) films have been successfully deposited on Ti–50.8 at.% Ni alloys using plasma based ion implantation (PBII) technique. The influence of the pulsed negative bias voltage applied to the substrate from 12 eV to 40 eV on the surface characteristics and corrosion resistant property as well as hemocompatibility has been investigated. The results show that the RMS values firs...

J. Przondziono, E. Hadasik, J.Szala, J. Wieczorek, Faculty of Materials Science and Metallurgy, The Silesian University of Technology, Katowice, Poland, W. Walke, Faculty of Biomedical Engineering, The Silesian University of Technology, Gliwice, Poland The purpose of the study was t o evaluate resistance to electrochemical corrosion of magnesium alloy WE43 after plastic working. Potentiodynamic...

Interactions between copper and chlorine disinfectants were examined from the perspective of disinfectant decay and copper pitting corrosion. Sparingly soluble cupric hydroxide catalyzed the rapid decay of free chlorine, which in turn, led to production of less soluble and more crystalline phases of cupric hydroxide. The catalytic activity of the cupric hydroxide was retained over multiple cycl...

continue on reverse if necessary and identify by block number) The corrosion mechanisms and behavior of a P-130x graphite fiber reinforced 6063 aluminum composite laminate were udied. Electrochemical and total immersion tests were performed on the composite in 3.5% sodium chloride and 5.0% >dium sulfate solutions. The effects of pH, the presence of sulfite ions, various heat treatments, and ele...

magnesium alloys as biodegradable materials can be used in body as an implant materials but since they have poor corrosion resistance, it is required to decrease their corrosion rate by biocompatible coatings. in this study, hydroxyapatite (ha) coatings in the presence of an intermediate layer of zrn as a biocompatible material, deposited on az91 magnesium alloy by ion beam sputtering method at...

The role of isothermal aging on the localized corrosion behavior of Al90Fe5Gd5 and Al87Ni8.7Y4.3 alloys was characterized in 0.6 M NaCl solution. The pitting (Epit) and repassivation (Erp) potentials were both increased ~400 mV by the presence of transition and rare earth metal additions in supersaturated solid solution and amorphous structure. A statistical distribution in Epit observed on sma...

The in ̄uence of chloride ion concentration and pH on the corrosion and electrochemical behaviour of die-cast and ingot-cast AZ91D alloy have been studied with a focus on the stability of microconstituents in these environments. The experimental techniques used include immersion studies, potentiodynamic polarization, X-ray di€raction and optical and scanning electron microscopy. The corrosion ra...

Due to adverse environmental conditions corrosion can develop during the life cycle of industrial structures, e.g., offshore oil platforms, ships, and desalination plants. Both pitting corrosion and generalized corrosion leading to wall thickness loss can cause the degradation of the integrity and load bearing capacity of the structure. Structural health monitoring of corrosion damage in diffic...