The aim of the present work is to investigate the influence of the Mode-I crack on the plane waves in a linearly fiber-reinforced. A general model of the equations of coupled theory (CD) and Lord-Shulman (LS) theory with one relaxation time are applied to study the influence of reinforcement on the total deformation for an infinite space weakened by a finite linear opening Mode-I crack is solvi...

Consider a three-dimensional homogeneous isotropic elastic solid containing a flat pressurized crack, fi. The problem of finding the resulting stress distribution can be reduced to a hypersingular integral equation over Q for the crack-opening displacement. Here, this equation is transformed into a similar equation over a circular region D, using a conformal mapping between Q and D. This new eq...

In this paper, a fracto-metallographic analysis was performed on the cracked specimens of cold drawn pearlitic steel subjected to fatigue tests. Fatigue cracks are transcollonial and exhibit a preference for fracturing pearlitic lamellae, with non-uniform crack opening displacement values, micro-discontinuities, branchings, bifurcations and frequent local deflections that create microstructural...

Although a thorough understanding of fatigue crack initiation is lacking, experiments have shown that the evolution of distinct dislocation distributions and surface roughness are key ingredients. In the present study we introduce a computational framework that ties together dislocation dynamics, the fields due to crystallographic surface steps and cohesive surfaces to model near-atomic separat...

Rolling friction has been explained in terms of crack propagation through an adhesive joint. The contact between a smooth cylinder and flat has been regarded as an adhesive junction bounded by two cracks moving in the same direction at the same speed, one crack continually opening and one closing. Propagation of these cracks requires a force which is calculated from crack theory and shown to be...

Introduction: The fracture mechanisms of bone tissue have been described as a damage accumulation process, which starts with the initiation and propagation of microcracks. Knowledge of crack initiation and propagation at tissue level (tissue fracture toughness) is critical to understand and prevent bone fractures. Tissue fracture toughness could provide valuable information for defining bone qu...

Debonding of an inclusion from the surrounding matrix in the presence of a nearby crack tip is studied numerically. Finite element models of symmetric three-point bend configurations are implemented in conjunction with a stiffness degradation method and the maximum tensile stress criteria to investigate the influence of debonding on crack tip parameters. The geometry considered is a single edge...

The role of grain bridging in affecting the initial rising portion of the R-curve and the transient, non-steady-state behavior of short cracks during (cyclic) fatigue-crack propagation has been quantitatively examined in a 99.5% pure alumina. Fatigue-crack growth properties for both long and short ( af < 2 mm) cracks emanating from machined notches (root radius, 15–150 m) were investigated, whe...

Phase-field models for crack propagation enable the simulation of complex crack patterns without complex and expensive tracking and remeshing as cracks grow. In the setting without inertia, the crack evolution is obtained from a variational energetic starting point, and leads to an equation for the order parameter coupled to elastostatics. Careful mathematical analysis has shown that this is co...