In this paper, the possibility of improving the global response of asphalt materials for pavement applications through the use of hydrated lime and Electric Arc-Furnace Steel Slag (EAFSS) was investigated. For this purpose, a set of asphalt mortars was prepared by mixing two different asphalt binders with fine granite aggregate together with hydrated lime or EAFSS at three different percentages...

The coupling effect between tire and pavement is an intensively researched subject to analyse the dynamic interaction of the vehicle-pavement system. By considering the 11.00 R20 tire and expressway asphalt pavement, ABAQUS software was employed in this study to establish an improved model for simulating the coupling effect, in which the tire rubber was taken as a neoHookean material and the pa...

One of the main objectives of the top asphalt layer is to provide a protective surface against water penetration and other harmful liquids such as chemicals. However, current construction equipments do not provide finished asphalt surfaces that meet this quality and therefore, allowing the intrusion of several liquids through the asphalt layers and deeper into the underlying soils. Subsequently...

Cold in-place recycling (CIR) has become an attractive method for rehabilitating asphalt roads that have good subgrade support and are suffering distress related to nonstructural aging and cracking of the pavement layer. Although CIR is widely used, its use could be expanded if its performance were more predictable. Transportation officials have observed roads that were recycled under similar c...

ii To my family, friends and professors who helped me throughout this experience iii ACKNOWLEDGEMENTS This research project was made possible with the help of many supporting people throughout the process. I wish to express my gratitude firstly to my supervising professor, Dr. Hosin " David " Lee for the support and advice needed to start and finish this project. I would also like to thank the ...

The dynamic modulus is the main input material property of asphalt mixtures for the modern mechanistic-empirical asphalt pavement design methods. The dynamic modulus is determined in laboratory by different procedures but in all cases, they require sophisticated equipment and well-trained personnel. When these experimental results are not available, they could be estimated using different predi...

Despite much speculation, the principal factors controlling concentrations of polycyclic aromatic hydrocarbons (PAH) in settled house dust (SHD) have not yet been identified. In response to recent reports that dust from pavement with coal-tar-based sealcoat contains extremely high concentrations of PAH, we measured PAH in SHD from 23 apartments and in dust from their associated parking lots, on...

Superpave is an acronym for Superior Performing Asphalt Pavements. It is the product of the Strategic Highway Research Program. Superpave includes a new mixture design and analysis system based on performance characteristics of the pavement. It is a multi-faceted system with a tiered approach to designing asphalt mixtures based on desired performance. There is a great deal of work underway to r...

this paper is a state-of-the-art in sulphur-asphalt (sa) design technology based on a comprehensive analysis of current practice and technical literature, in order to investigate the possible use of sa pavements in iran. in this paper, the major aspects(material, technology, properties, production, placement, quality assurance, design, and field varification) of sa pavements are considered. fer...

Pavement rutting is one of the most common and destructive pavement distresses being observed in flexible pavements, which is primarily due to axle loads that exceed legal limit and high ambient temperatures, and also poor mix design is one of the cause of rutting. The drastic increase in traffic volume during last few decades has resulted in premature pavement failures of almost the whole road...