نتایج جستجو برای: creep and relaxation
تعداد نتایج: 16841633 فیلتر نتایج به سال:
The ac susceptibility of a superferromagnetic discontinuous multilayer [Co(80)Fe20(1.4 nm)/Al(2)O3(3 nm)](10) is measured as a function of temperature, frequency, and field amplitude and compared to static and dynamic hysteresis loops. Its properties are successfully mapped onto the predicted [T. Nattermann, V. Pokrovsky, and V. M. Vinokur, Phys. Rev. Lett. 87, 197005 (2001)]] dynamical phase t...
In this study, the non-linear creep behaviour of a thick-walled cylinder made of stainless steel 316 is investigated using a semi-analytical method. The thick-walled cylinder is under a uniform internal pressure and a non-axisymmetric thermal field as a function of the radial and circumferential coordinates. For the high temperature and stress levels, creep phenomena play a major role in stress...
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
Assessment of creep damage and residual creep life of a cast HP 40 Nb Mod. Reformer tube was performed, wherein the experimental Larson–Miller diagram and area fraction of creep voids were adopted. The state of damage of the tube in service was metallographically analyzed by using light and electron microscopy. Samples from the serviced reformer furnace tube were cut and prepared for void exami...
Life assessment on the base of grain boundary creep cavitation of 1%Cr - 0.5%Mo low alloy steel has been discussed in this paper. Since microstructural degradation is one of the most important mechanisms that affects creep life, it is necessary to assess microstructural damage in order to estimate the life. Microstructural damage within the grain boundaries is a continuous phenomena starting fr...
Recently, some fluid or pour resins have been introduced to simplify the processing of dentures. However, because of the presence of relatively high residual monomer, the mechanical properties of these resins are inferior to those of heat cured resins.1,2) The purpose of the present investigation is to measure the quantities of residual monomer and to investigate the effect of the residual mono...
The vortex dynamics of Bi2Sr2Ca1−xGdxCu2O8+δ single crystals is investigated by magnetic relaxation and hysteresis measurements. By substituting Ca with Gd, it is found that the interlayer Josephson coupling is weakened and the anisotropy is increased, which leads to the change of vortex dynamics from 3D elastic to 2D plastic vortex creep. Moreover, the second magnetization peak, which can be o...
The laminar flow of a number of fluids such as polymeric liquids, food products, paints, slurries, foams, and so forth cannot be adequately described by the help of the classical linearly viscous Newtonian model. Thus, there is a need to have at hand an arsenal of non-Newtonian fluid models and over the past several decades a variety of models have been developed. While the fluids of the differ...
Molecular dynamics simulations are used to investigate the effects of deformation on the segmental dynamics in an aging polymer glass. Individual particle trajectories are decomposed into a series of discontinuous hops, from which we obtain the full distribution of relaxation times and displacements under three deformation protocols: step stress (creep), step strain, and constant strain rate de...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید