The effect of cumulative damage on the strength requirements of degrading structures is assessed through the evaluation of the target ductility and corresponding strength reduction factors of simple degrading structures. While the reduction on ductility is established through the use of Park and Ang index, the suggestions given by Bojórquez and Rivera are used to model the degradation of the st...

The suitability of high-strength ultrafine and nanocrystalline materials processed by severe plastic deformation methods and aimed to be used for structural applications will strongly depend on their resistance against crack growth. In this contribution some general available findings on the damage tolerance of this material class will be summarized. Particularly, the occurrence of a pronounced...

The damage evolution of concrete subjected to drying-wetting cycles in different concentration of sodium sulfate solution was investigated based on micro and macro-observations. Through the experiment, weight loss, compressive strength loss and the damage layer thickness of concrete were measured after different drying-wetting cycles. The mechanical properties degradation in the damage layer of...

Thirty-two volunteers participated in a two-period crossover study in which ibuprofen was tested against an identical placebo for its effectiveness in reducing muscle soreness and damage after two bouts of downhill running. Subjective soreness, quadriceps isometric strength and isometric endurance time at 50 percent of maximum strength, serum activities of creatine kinase, lactate dehydrogenase...

Quasi-static and dynamic compression and three-point bending tests have been carried out on Strombus gigas (conch) shells. The mechanical response is correlated with its microstructure and damage mechanisms. The mechanical response is found to vary significantly from specimen to specimen and requires the application of Weibull statistics in order to be quantitatively evaluated. The conch exhibi...

The mechanical characteristics of rock salt have an important influence on the safety of the salt cavity. The acoustic emission (AE) technique was used to analyze the generation of microcracks in rock salt under uniaxial compression condition. By monitoring acoustic emission in whole process of stress strain curve under uniaxial compression test, the damage characteristic of rock salt is obtain...

Most aircraft fleets nowadays are operating under the concept of damage tolerance, which requires an aircraft to have sufficient residual strength in the presence of damage in one of its principal structural elements (PSE) during the interval of service inspections. The residual strength however is significantly reduced due to multi site damage (MSD). In the present paper, a probabilistic frame...

Most aircraft fleets nowadays are operating under the concept of damage tolerance, which requires an aircraft to have sufficient residual strength in the presence of damage in one of its principal structural elements (PSE) during the interval of service inspections. The residual strength however is significantly reduced due to multi site damage (MSD). In the present paper, a probabilistic frame...

The microscopic and geomechanical properties of igneous building stones include the level of alteration, presence of micro cracks, peak strength, porosity, proportion of detrimental minerals, etc. Porosity is reportedly of a devastating impact on the peak strength of igneous rocks. The quartz diorite rock samples in this study were selected from five quarries in Natanz, Iran and subject to micr...

Although traditional signal-based structural health monitoring algorithms have been successfully employed for small structures, their application for large and complex bridges has been challenging due to non-stationary signal characteristics with a high level of noise. In this paper, a promising damage detection algorithm is proposed by incorporation of adaptive signal processing and Artificial...