Recent efforts to blend and compatibilize intrinsically immiscible polymers in the solid state by high-energy methods have shown that macromolecules may undergo scission, crosslinking or amorphization, depending on the chemical nature of the repeat unit, the processing temperature and the initial degree of polymer crystallinity. Identical process-induced molecular and structural modifications h...

The effect of temperature variation on the growth of Carbon Nanotubes (CNTs) using Thermal Chemical Vapor Deposition (TCVD) is presented. Nickel and Cobalt (Ni-Co) thin films on Silicon (Si) substrates were used as catalysts in TCVD technique. Acetylene gas was used in CNTs growth process at the controlled temperature ranges from 850-1000 ̊ C. Catalysts and CNTs characterization was carried out ...

Dilute sulfuric acid hydrolysis was performed before the isolation of cellulose from Eulaliopsis binata. And then, the effects of dilute acid hydrolysis on composition and structure of the cellulose was studied in detail. The results indicated that hemicellulose was dissolved mostly and that the lignin-hemicellulose-cellulose interactions were also partially disrupted during the dilute acid hyd...

an account is presented on investigation of the effects of synthesis parameters, i.e., reaction sources, silica to alumina ratio, acid molar ratio and crystallization conditions on the crystallinity, morphology and particle size of sapo-34. the synthesis conditions were designed to produce small particles with narrow size range. the prepared samples were characterized by xrd and sem techniques ...

monolithic aerogels of high molecular weight polyethylene (mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. these low density and highly porous aerogels present an apparent porosity up to 90%. the aerogel morphology observed by scanning electron microscopy (sem) is characterized by spherulitic stru...

In this work, the compatibility and crystallinity of low density polyethylene (LDPE) and polybutene-1 (PB-1) blends were studied. Various blends of LDPE/PB-1 containing 5, 10 and 20 wt.% PB-1 were prepared in a corotating twin-screw extruder and characterized by scanning electron microscopy (SEM), shear oscillation rheology and wide-angle X-ray diffractometry (WAXD). A matrix-droplet morphology...

The objective of this study was to explore the effect of the character of chitosans used, and the regeneration conditions employed on, the yield and physicochemical characteristics of regenerated products. Different concentrations of acetic acid were used to dissolve chitosans of 61.7% and 94.9% degree of deacetylation (DD), and weight-average molecular weight (Mw) of 176 and 97 kDa, respective...

A binary blend of polycaprolactone and starch in 70:30 weight ratio (known under the tradename “Envar”) was blended in various weight ratios with organosolv lignin (L) and organosolv lignin butyrate (LB) by solvent casting and melt blending. The thermal transitions observed by DSC revealed behavior resembling that of native polycaprolactone (PCL). Depression in melting temperatures obtained by ...