OBJECTIVES The purpose of this study was to evaluate the temperature change during low-speed drilling using infrared thermography. MATERIAL AND METHODS Pig ribs were used to provide cortical bone of a similar quality to human mandible. Heat production by three implant drill systems (two conventional drilling systems and one low-speed drilling system) was evaluated by measuring the bone temper...

This work explores light delivery optimization for photoacoustic-guided minimally invasive surgeries, such as the endonasal transsphenoidal approach. Monte Carlo simulations were employed to study three-dimensional light propagation in tissue, comprising one or two 4-mm diameter arteries located 3 mm below bone, an absorbing metallic drill contacting the bone surface, and a single light source ...

Drilling is the most frequently employed operation of secondary machining for fiber-reinforced materials owing to the need for joining structures. Delamination is among the serious concerns during drilling. Practical experience proves the advantage of using such special drills as saw drill, candle stick drill, core drill and step drill. The experimental investigation described in this paper exa...

This paper presents a prediction and evaluation of delamination factor in use of twist drill, candle stick drill and saw drill. The approach is based on Taguchi’s method and the analysis of variance (ANOVA). An ultrasonic C-Scan to examine the delamination of carbon fiber-reinforced plastic (CFRP) laminate is used in this paper. The experiments were conducted to study the delamination factor un...

The aim of this investigation is to devise a robust detection method for drill bit break-through when drilling into long bones using an automated drilling system that is associated with mechatronic assisted surgery. This investigation looks into the effects of system compliance and inherent drilling force fluctuation on the profiles of drilling force, drilling force, drilling between successive...

Background: Drilling is one of the most widely used process in orthopaedic surgical operation and the same drill bit is used a number of times in hospitals. Using the same drill bit a several times may be the cause of osteosynthesis and osteonecrosis. Methods: In the present work, the effect of repeated orthopaedic surgical twist drill bit on the tool wear, force, torque, temperature and chip m...

Advantages  Technology allows for improved diamond deposition process, which results in stronger adhesion.  Improved adhesion of the film produces lower stresses to thereby increase the drill lifetime.  When compared to untreated drill bit, our drill bit was able to drill over 100 holes, whereas the untreated only drilled 40 holes before breaking. o Increased durability over 50% Diamond film...

This paper analyses the non linear properties exhibited by a drill string system under various un balanced mass conditions. The drill string is affected by continuous friction in the form of drill bit and well bore hole interactions. This paper proves the origin of limit cycling and increase of non linearity with increase in speed of the drilling in the presence of friction. The spectrum of the...

A distributed Brillouin fiber sensor has been employed to detect localized pipe-wall buckling in an energy pipe by measuring the longitudinal and hoop strain distributions along the outer surface of the pipe for the first time. The locations of the localized pipe-wall buckling are found and distinguished using their corresponding strain-load data. The formation of the buckling process for the c...

Buried water and gas pipe systems form part of critical infrastructure providing essential services to the community. In many global population centres including in Australia, this vital infrastructure has been installed several decades ago, and dealing with frequent pipe failures become a major problem. There are clear evidences that pipe failures significantly depend on pipe strains induced b...