-A broad-band acoustic emission detection system has been used to record the transient surface displacements due to the release of elastic waves during deformation and fracture of EN3OA. a low-alloy steel. Acoustic emission signals were recorded from material tested in the quenched, tempered and temper-embrittled conditions: Tests were also performed upon material which had been hydrogen charge...

the relations of fibrolite-biotite are discussed by presenting data from the ardara aureole, nw ireland. biotite-fibrolite intergrowths are developed in all three aureole zones including: the outer kyanite-bearing andalusite zone, the middle kyanite-free andalusite zone and the inner prismatic sillimanite zone. a strain-assisted mechanism is proposed for the fibrolitisation of biotite in the ar...

Micromechanisms of ductile fracturing of DH-36 steel plates subjected to blast-induced pressure loads are studied experimentally using specially designed dynamic testing facilities. The sample geometry is such that it undergoes controllable fracturing, generally initiated near its center and grows first circumferentially and then radially. Selected fractured samples are sectioned normal to the ...

We use the L-band Advanced Land Observing Satellite (ALOS) and C-band Envisat interferometric synthetic aperture data and campaign GPS observations to study the postseismic deformation due to the 2005 magnitude 7.6 Kashmir (Pakistan) earthquake that occurred in the northwestern Himalaya. Envisat data are available from both the descending and ascending orbits and span a time period of~4.5 years...

master moulds are used to cast copper anode moulds. these iron moulds are made of grey or nodular cast irons. according to desirable properties of ductile irons, it was expected that ductile cast iron moulds could have performed their nominal life. but in service, these moulds have not performed their nominal life and they have experienced premature failures due to warping and cracking. also gr...

Deformation pattern of the northeastern part of the Iranian-Arabian collision zone (i.e., mainly Sanandaj-Sirjan Belt or Zone) is the main concern of this paper. Here, we investigate the stress distribution and displacement pattern of Eghlid-Deh Bid area as affected by the position of Zagros suture using a three dimensional mechanical model. The modeled area is located between the Zagros Thrust...

Small variations in gravity anomalies and topographic elevation observed in areas that have undergone highly variable amounts of upper crustal thinning can be satisfactorily explained by ductile flow of lower crustal material under the proper conditions. In this study we examine the boundary between the unextended Colorado Plateau and a strongly extended domain in the Basin and Range Province i...

The ferritic ductile iron (FCD400) is widely used as industrial material. As regards to its high temperature application, fatigue at elevated temperature, and advanced mechanical properties has been investigated and clarified. In low cycle fatigue (LCF), the S-N curve is presented by the relation of plastic strain to the number of cycles as fatigue life, which can be predicted by the Manson-Cof...

In orogenic belts, a basal décollement zone often develops at depth to accommodate the shortening due to folding and thrusting of the sedimentary cover. In the Early Mesozoic intracontinental Xuefengshan Belt of South China, such a décollement zone is exposed in the core of anticlines formed by the emplacement of the late-orogenic granitic plutons. The detailed, multi-scale structural analysis ...