the changes in viscoelastic properties of potatoes (tubuls agria) stored at 4 ˚c for 4 months were modeled and evaluated by using the creep-recovery test. cylindrical specimens with 15 mm in diameter and 35 mm long were used. the samples were allowed to deform gradually under the constant stress (110 kpa) for about 30 min. after removing the load, the sample recovery was registered. deformation...

Differences between stress-based and strain-based criteria are investigated in seismic performance evaluation of the arch dams in time domain. A numerical model of the coupled dam-reservoir-foundation system is prepared with the finite element technique. Reservoir is modeled using the Eulerian approach as a compressible domain, and the foundation rock is assumed to be massless. Dynamic equilibr...

The material response discussed in the previous chapters was limited to the response of elastic materials, in particular to linearly elastic materials. Most metals, for example, exhibit linearly elastic behavior when they are subjected to relatively low stresses at room temperature. They undergo plastic deformations at high stress levels. For an elastic material, the relationship between stress...

High energy electron (1.0±2.55 MeV) irradiation was used to modify the phase transitional behavior of poly(vinylidene ̄uoridetri ̄uoroethylene) (P(VDF-TrFE)) copolymers in an attempt to signi®cantly improve the electromechanical properties of the copolymers. It is found that the copolymers under a proper irradiation treatment exhibit very little room temperature polarization hysteresis and very ...

We have investigated anharmonic behavior of Pd by applying systematic nanoscale tensile testing to near defect-free nanowhiskers offering a large range of elastic strain. We measured size-dependent deviations from bulk elastic behavior in nanowhiskers with diameters as small as ∼30 nm. In addition to size-dependent variations in Young's modulus in the small strain limit, we measured nonlinear e...

the pseudo-elastic behavior of shape memory alloy (sma) truss and cantilever beam are investigated. brinson’s one-dimensional material model, which uses the twinned and detwinned martensite fractions separately as internal variables, is applied in the algorithm to establish the sma stress-strain characteristics. this material model also incorporates different young’s modulus for austenitic and ...