Temperature is one of the effective parameters in erosion of spark plug electrodes. In this research, temperature of spark plug was measured in engine's different operation conditions with two types of fuels: compressed natural gas and gasoline. Test results showed that, temperature of center electrode is lower than ground electrode and maximum difference between them is 110ºC that occurs at...

Electro-deposition repairing concrete crack technique is of vital importance to prolong the service life structure in marine environment. In this paper, effect using seawater as an electrolyte was compared with ZnSO4 solutions, and mechanism electro-deposition cracks under environments investigated. Besides, various parameters such electrode materials, distances current density were studied sea...

Ferroelectric Bi4Ti3012 thin films have been grown on MgO ( 100) and MgO( 110) substrates by the pulsed laser deposition. X-ray diffraction studies show that the films on both substrates have preferential crystallographic orientation such that most of their c axes are close to the substrate normal direction. The film on MgO( 110) shows quadratic and hysteretic electro-optic characteristics with...

A laser opto-microactuator has been proposed as an Optical Micro-Electro-Mechanical-Systems (OMEMS). The rotational or twisting mechanisms of the microactuator have been discussed. For increasing the sensitivity of the actuator, the temperature difference between the front and rear blade surfaces of the actuator should be increased. Therefore, high absorption rates on the blade surface with las...

Flash sintering is a very promising method with great potential for the ultra-rapid production of objects firing processes mere seconds. However, transition from few millimeters samples to larger scales key issue. In this study, we explore spark plasma approach allowing stable hybrid heating in flash condition and producing near net shape sintered specimens. Two electric current configurations ...

We present a detailed study of the interface morphology of an electro-deposited (ED) Ni/Cu bilayer film by using off-specular (diffuse) neutron reflectivity technique and Atomic Force Microscopy (AFM). The Ni/Cu bilayer has been electro-deposited on seed layers of Ti/Cu. These two seed layers were deposited by magnetron sputtering. The depth profile of density in the sample has been obtained fr...

gas motion within the cylinder is one of the major factors that control the combustion process in spark ignition engine. it also has significant impact on heat transfer. both the bulk gas motion and the turbulence characteristics of the flow are important and governing the overall behavior of the flow. an arrangement for obtaining a stratified charge, using port injection, is proposed for a cur...

Major joining methods of dental casting metal include brazing and laser welding. However, brazing cannot be applied for electroformed metals since heat treatment could affect the fit, and, therefore, laser welding is used for such metals. New methods of joining metals that do not impair the characteristics of electroformed metals should be developed. When new coating is performed on the surface...

Introduction: One of the most important human senses is vision, which its loss is causing many primary and secondary complications for physical and psychological health such as difficulties in static and dynamic balance. This study aimed to compare the effect of 8 weeks of Spark and Frenkel exercises training on the static and dynamic balance in blind people. ...