In this paper, we report a new 4 H-silicon carbide (SiC) lateral dual sidewall Schottky (LDSS) rectifier on a highly doped drift layer consisting of a high-barrier sidewall Schottky contact on top of the low-barrier Schottky contact. Using twodimensional (2-D) device simulation, the performance of the proposed device has been evaluated in detail by comparing its characteristics with those of th...

Aim: This study aims to evaluate the difference between depth data from an intraoral cone and a conventional irradiation tube calculated using a treatment planning system (TPS), and that measured using an intraoral cone for electron radiotherapy. Background: A TPS is only compatible with conventional irradiation tubes. However, such systems are not suitable for determining dose distributions wh...

A self-focusing field emission (FE) X-ray tube with a large-area cathode design was simulated and fabricated. The designed X-ray tube had a cylindrically symmetric geometry; the diameter of the cathode and the anode was 15 mm, and the cathode-anode distance was 20 mm. Owing to the unique cup-shaped design of the cathode, the electron beam emitted from the large-area cathode was focused onto the...

One of the basic problems of the design of the portable x-ray devices for the works under the field conditions is to get smallest possible weight and the overall sizes. The classical apparatuses, which contain thermo-emission X-ray tube and source of constant high voltage as a rule have weight about 15-30 kg, which strongly impedes their use in the nonstationary conditions. In the proposed work...

To efficiently supply wide-range DC voltage from a pulse-width modulation (PWM) rectifier, this paper presents a single-phase, full-wave, diode-bridge, single-ended primary-inductor converter-type (SEPIC-type) power-factor-correction (PFC) rectifier in continuous conduction mode with a sliding surface-regulated current-mode PWM controller. According to the switched-mode operation of the rectifi...

A scanning electron microscopic study of selected morphological stages of Candida albicans is presented. Stages represented are budding yeast cells, mycelial-like forms, chlamydospores, germ tube formation, and an unusual rough cell type.

Introduction: The performance of computed tomography is routinely checked using phantoms, which are known as important diagnostic imaging tools. Depending upon the aim of the study, different phantoms are designed, while trying to satisfy certain levels of diversities in their application. Material and Methods: The present study describes the...

The external morphology and internal structure of the male sexual tube of the hermit crab Micropagurus acantholepis, a member of the family Paguridae from Australian waters, is described in detail using histological thick sectioning and scanning and transmission electron microscopy techniques. This is the first in-depth study of a sexual tube in the Paguroidea, a group where a remarkable number...

Motor drive systems based on diode-rectifier are utilised in many industrial and commercial applications due to their cost-effectiveness simple topology. However, these diode rectifier-based can be affected by power quality harmonics distribution networks. Thus, this paper investigates the impact of grid voltage operation converters with three-phase rectifier using mathematical formulation curr...

Oxide material can make transparent devices with transparent electrodes. We developed a transparent oscillator and rectifier circuits with oxide TFTs. The source/drain and gate electrodes were made by indium thin oxide (ITO), and active layer made by transparent material of IGZO (Indium Gallium Zinc Oxide) on a glass substrate. The RC oscillator was composed of bootstrapped inverters, and 813 k...