The aim of the present research is to convert bioinert surface of NiTi to bioactive and biocompatible surface. In order to develop a bioactive and corrosion resistant film on NiTi, electrophoretic deposition process was done and TiO2 particles were deposited on the NiTi surface. Suspensions including TiO2 particles were prepared using a mixture of acetone and n-butanol (0%, 30%, 60%, 80% and 10...

SiO2-ZrO2 sols have been prepared via acid catalysis using a commercial colloidal suspension of zirconia and two silica alkoxides; tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES). Suspensions with 10, 15 and 25-mol% of ZrO2 were prepared. The stability of the suspensions was followed by rheological measurements showing that the amount of water incorporated with the colloidal suspensio...

Intercalation of lithium into Ag-CNTs sample is reported here. We have used a nano-porous silver foam as a frame for deposition of the CNTs   inside   the   pores   by   electrophoresis   deposition   (EPD) technique. By using  chronopotentiometry method,  we  have noticed that the Li storage capacity of the prepared Ag-CNTs electrode was improved  noticeably  in  comparison  with  literature. ...

The thermal relaxation of macrospins in a strongly interacting thin film of spinel-phase iron oxide nanocrystals (NCs) is probed by vibrating sample magnetometry (VSM). Thin films are fabricated by depositing FeO/Fe(3)O(4) core-shell NCs by electrophoretic deposition (EPD), followed by sintering at 400°C. Sintering transforms the core-shell structure to a uniform spinel phase, which effectively...

To optimize the conversion efficiency of plastic dye-sensitized solar cells fabricated by the electrophoretic deposition technique, anatase TiO2 nanoparticles of various sizes from 10 nm to 27 nm have been synthesized via a simple hydrothermal process. The obtained TiO2 nanoparticles have been characterized by X-ray diffraction and high resolution transmission electron microscopy, which confirm...

intercalation of lithium into ag-cnts sample is reported here. we have used a nano-porous silver foam as a frame for deposition of the cnts   inside   the   pores   by   electrophoresis   deposition   (epd) technique. by using  chronopotentiometry method,  we  have noticed that the li storage capacity of the prepared ag-cnts electrode was improved  noticeably  in  comparison  with  literature. ...

PURPOSE Main aim of the present study was to test and show the dissolution of coatings onto Ti6Al4V pedicle screws by both in vitro and in vivo analysis. METHODS Hydroxyapatite (HA) was coated on Ti6Al4V by electrophoretic deposition (EPD). The dissolution of the coatings was tested in vitro. The coating was characterized before and after implantation via pull-out tests, X-ray diffraction (XR...

Although magnesium (Mg) is a unique biodegradable metal which possesses mechanical property similar to that of the natural bone and can be an attractive material to be used as orthopedic implants, its quick corrosion rate restricts its actual clinical applications. To control its rapid degradation, we have modified the surface of magnesium implant using fluoridated hydroxyapatite (FHA: Ca10(PO4...

As the world’s populations increase and age, there is a parallel increase in the number of medical procedures addressed to bone related injuries. It is estimated that approximately 1 million of orthopaedic implant surgeries in association with total joint replacements are needed every year. This number is expected to double between 1999 and 2025 as a result of increasing numbers of musculoskele...