Soy-based adhesives have attracted much attention recently because they are environmentally safe, low cost, and readily available. To improve the gluability and water resistance of soy-based adhesives, we prepared an enzyme-treated soy-based adhesive modified with an epoxy resin. We investigated the wet shear strength of plywood bonded with the modified adhesive using the boiling-water test. Fo...

External bonding of carbon fiber sheets has become a popular technique for strengthening concrete structures all over the world. Epoxy adhesive, which is used to bond the carbon fiber sheets and concrete, deteriorates rapidly when being exposed to high temperatures. This paper presents a high-temperature-resistant modified magnesia-phosphate cement (MPC) with the compressive strength that does ...

Two component, waterbased epoxy coatings can be classified by the type of epoxy resin employed. Low molecular weight, liquid epoxy systems are commonly referred to as Type I, whereas systems based on higher molecular weight, solid epoxy dispersions are referred to as Type II. This paper will focus on coatings based on both types of resins. In the first case, novel curing agent technology for us...

Dispersion of nanomaterials in polymeric matrices plays an important role in determining the final properties of the composites. Dispersion in nano scale, and especially in single layers, provides best opportunity for bonding. In this study, we propose that by proper functionalization and mixing strategy of graphene its dispersion, and bonding to the polymeric matrix can be improved. We then ap...

The use of fast FT-IR spectroscopy as a sensitive method to estimate a change of the crosslinking kinetics of epoxy resin with polyamine adducts is described in this study. A new epoxy formulation based on the use of polyamine adducts as the hardeners was analyzed. Crosslinking reactions of the different stoichiometric mixtures of the unmodified GY250 epoxy resin with the aliphatic EH606 and th...

This research aimed to evaluate the thermal properties of new formulations of phase change materials (PCMs)-epoxy composites, containing a thickening agent and a thermally conductive phase. The composite specimens produced consisted of composites fabricated using (a) inorganic PCMs (hydrated salts), epoxy resins and aluminum particulates or (b) organic PCM (paraffin), epoxy resins, and copper p...

ing operations involvig the use of a bisphenol-A diglycidyl ether tye of epoxy resin. ln a faciity producig miltaiy aircraft, the use of an epoxy prier did not result in detectable epoxide levels, and the authors surmised that the epoxy-amine curig reaction had probably . consumed most of the epoxide group. Epoxide levels of 2-12 J.Eq/m3 epode functional group were recorded durig the painting o...

background and aims. one of the major problems of all-ceramic restorations is their probable fracture under occlusal force. the aim of the present in vitro study was to compare the effect of two marginal designs (chamfer and deep chamfer) on the fracture resistance of all-ceramic restorations, cercon. materials and methods. this in vitro study was carried out with single-blind experimental tech...

results the results showed that the epoxy plates 6 and 2 mm thick had the highest and the lowest averages of shielding effectiveness at 4.48 db and 1.90 db, respectively. however, increasing the thickness was useful up to 4 mm. in addition, in a similar attenuation pattern, x-band frequency was divided into lower, middle, and upper sections. the lower section had the highest shielding effective...

This Review discusses nanoskiving--a simple and inexpensive method of nanofabrication, which minimizes requirements for access to cleanrooms and associated facilities, and which makes it possible to fabricate nanostructures from materials, and of geometries, to which more familiar methods of nanofabrication are not applicable. Nanoskiving requires three steps: 1) deposition of a metallic, semic...