In this paper an attempt has beenmade to optimize ply stacking sequence of single piece E-Glass/Epoxy, HM Carbon/Epoxy and Boron/Epoxy composite drive shafts using particle swarm optimization (PSOA). PSOA programme is developed using MATLAB V 7 to optimize the ply stacking sequence with an objective of weight minimization. The weight savings of the E-Glass/Epoxy, HMCarbon/Epoxy andBoron/Epoxy s...

Polysulfide resins,with trade name of  G4 and G112, with short and long chain lengths respectively, were used as reactive modifiers to toughen epoxy resin. The effects of molecular weights of G4 and G112 on impact resistance, dielectric constant, thermal conductivity as well as decomposition  heat and adhesion properties of toughened epoxy were investigated. The impact strength and the diel...

The title mol-ecule, C(12)H(10)BrNO(2), adopts an E configuration with respect to the C=C bond of the acrylate unit. In the crystal structure, mol-ecules are connected by a pair of inter-molecular C-H⋯O hydrogen bonds, forming a centrosymmetric dimer.

Effects of chemical structure changes on the thermal, mechanical, and crystalline properties of rigid rod epoxy resins have been studied for azomethine epoxy, biphenol epoxy, and tetramethyl biphenol epoxy. Rigid rod epoxies have exhibited better properties than those of the flexible bisphenol A epoxy. The chemical structures of both rigid rod epoxy and curing agent control the properties of cu...

STATEMENT OF PROBLEM Resinous die materials have several important advantages including strength, abrasion resistance, and detail reproduction. Despite these advantages, the shrinkage of resinous die materials during polymerization has limited their widespread acceptance. PURPOSE This study determined whether a retarded setting reaction could improve the accuracy of an epoxy resin die system,...

BACKGROUND Diglycidylether of bisphenol A resin is the most important sensitizer in epoxy systems, but a minority of patients develop concomitant or solitary contact allergy to epoxy hardeners. At the Finnish Institute of Occupational Health, several in-house test substances of epoxy hardeners have been tested in a special epoxy compound patch test series. OBJECTIVES To analyse the frequency ...

BACKGROUND Measures to prevent occupational exposure to epoxy resins, including education, medical examination, and voluntary agreements between employers and workers, have not been effective enough to protect against skin sensitization. Therefore, alternatives to the major epoxy resin haptens that have been found to be less sensitizing in the local lymph node assay have been developed. OBJEC...

The octa-functionalized polyhedral oligomeric silsesquioxane (POSS) containing nanocomposites of epoxy resin are prepared via in situ co-polymerization of epoxy resins with 4,4’-diaminodiphenylsulfone (DDS) in the presence of octaaminophenyl silsesquioxane (OAPS). Two of the most common, technologically relevant epoxy resins, diglycidyl ether of bisphenol-A (DGEBA) and tetraglycidyl diamino dip...

The objective of this study was to investigate the potential use of sand washing waste as filler for epoxy resin mortar. The mechanical properties of four series of mortars containing epoxy binder at 10, 15, 20, and 25 wt. % mixed with sand blended with sand washing waste filler in the range of 0-20 wt. % were examined. The compressive and flexural strength increased with the increase in epoxy ...

Self-healing was achieved with a dual-microcapsule epoxy-amine chemistry in thermoset epoxy. One capsule contained a modified aliphatic polyamine (EPIKURE 3274) while the second capsule contained a diluted epoxy monomer (EPON 815C). Amine microcapsules were prepared by vacuum infiltration of EPIKURE 3274 into hollow polymeric microcapsules. Epoxy microcapsules were prepared by an in situ polyme...