Visibly highly transparent indium tin oxide (ITO)/epoxy nanocomposites were prepared by dispersing polyglycidyl methacrylate (PGMA) grafted ITO nanoparticles into a commercial epoxy resin. The oleic acid stabilized, highly crystalline, and near monodisperse ITO nanoparticles were synthesized via a nonaqueous synthetic route with multigram batch quantities. An azido-phosphate ligand was synthesi...

Short banana fiber reinforced composites have been prepared in laboratory to determine mechanical properties. It has been observed that as soon as the percentage of the banana fiber increases slightly there is a tremendous increase in ultimate tensile strength, % of strain and young modulus of elasticity. Reinforcement of banana fibers in epoxy resin increases stiffness and decreases damping pr...

Two approaches are combined to investigate the effect of localized thermomechanical loadings of periodic multiphase materials. The first one, referred to as the representative cell method, reduces the infinite domain problem to a problem for the periodicity cell by means of the discrete Fourier transform. This problem is solved by the discretization of the cell into several subcells and a secon...

Polymerization of β-phenyl glutaconic diethyl ester (GE) with various diamines (DA) at 1:2 molar ratios in 1,4dioxane solvent was carried out at reflux temperature. The resultant amino terminated unsaturated oligomers (ATUP) were characterized by elemental analysis, number of terminal amino groups, IR spectral studies, number average molecular weight estimated by non-aqueous conductometric titr...

In this work, we investigate the piezoresistive response of epoxy-graphite composites. A resistive thick-film Wheatstone bridge is deposited by screen-printing onto a beam, a weight is then applied on the tip of the beam and the resulting electrical signal response is recorded, allowing the calculation of the gauge factor. The characterization was made at room temperature, 65°C and 100°C for di...

In this paper, we demonstrated that 1-3 PZT/polymer composites, fabricated using PZT-4 ceramic and a polymer possessing a high glass transition temperature and low loss, can be used as high power ultrasonic transducer materials for high intensity focused ultrasound (HIFU) applications. The mechanical quality factor of the 1-3 composite with 64% ceramic volume fraction is over 200. The dielectri...

The article is concerned with hybrid amorphous polymers synthesized basing on epoxy oligomer of diglycide aliphatic ester of polyethylene glycol that was cured by polyethylene polyamine and lithium perchlorate salt. Structural peculiarities of organic-inorganic polymer composites were studied by differential scanning calorimetry, wide-angle X-ray spectra, infrared spectroscopic, scanning electr...

In this paperwe investigate themechanical behavior of carbonfiber composites,where the carbonfibers are coated with radially aligned carbon nanotubes. For this purpose we develop a general micromechanics method for fiber composites, where fibers are coated with radially aligned microfibers (‘‘fuzzy fiber’’ composites). The mechanical effective properties are computed with a special extension of...

Effect of addition of filler material to the natural fiber composite was experimentally investigated. Composites are manufactured by the conventional hand-layup method. All composites are made with a fixed banana fiber with 15% weight fraction addition of different weight fraction of (0, 3, 5, 7.5%) groundnut shell ash is added to the composite. Tensile, hardness, impact and compressive strengt...

This research investigates the effect of post-cure time on residual stresses in laminated composites. Laminated composites were made of T300 carbon fibers and epoxy resin. The post-cure process was carried out at the constant temperature of 120 °C for 6 and 12 hours for two specimens. The slitting method was employed to determine through-thickness residual stress distribution of the composite l...