The permeability of reverse osmosis membranes is limited by the diffusive transport of water across a non-porous polyamide active layer. Alternatively, fabricating a microporous active layer capable of rejecting salt ions while allowing for water transport would increase the permeability while maintaining high salt rejection. Zeolites provide a model porous network which is capable of performin...

Understanding the pore networks of unconventional tight reservoirs such as tight sandstones and shales is crucial for extracting oil/gas from such reservoirs. Mercury injection capillary pressure (MICP) and N2 gas adsorption (N2GA) are performed to evaluate pore structure of Chang-7 tight sandstone. Thin section observation, scanning electron microscope, grain size analysis, mineral composition...

this paper presents the results of a series of monotonic and post-cyclic triaxial tests carried out on a clay specimen and three types of clay-sand mixed specimens. the focus of the paper is on the post-cyclic mechanical behavior of the mixed specimens, as compared to their monotonic behavior. analyses of the tests results show that cyclic loading degrade undrained shear strength and deformatio...

Subsurface two-phase flow in porous media often takes place in reservoirs with a high ratio between the associated lateral and vertical extent and the lateral and vertical flow time scales. This allows for a two-scale approach with effective quantities for two-dimensional horizontal flow equations obtained from reconstructed hydrostatic vertical pressure and saturation distributions. Here, we d...

Grand canonical Monte Carlo (GCMC) simulation was used for the systematic investigation of the supercritical methane adsorption at 273 K on an open graphite surface and in slit-like micropores of different sizes. For both considered adsorption systems the calculated excess adsorption isotherms exhibit a maximum. The effect of the pore size on the maximum surface excess and isosteric enthalpy of...

In this study the effect of high pressure CO(2) on the synthesis and characteristics of elastin-based hybrid hydrogels was investigated. Tropoelastin/alpha-elastin hybrid hydrogels were fabricated by chemically cross-linking tropoelastin/alpha-elastin solutions with glutaraldehyde at high pressure CO(2). Dense gas CO(2) had a significant impact on the characteristics of the fabricated hydrogels...