Homogeneous charge compression ignition (HCCI) seems to be the most promising solution for gasoline engines in the light of future emissions regulations. This novel combustion technique allows for significant reduction of fuel consumption and engine-out NOX emissions at low and medium engine load/speed conditions. High heat release rate enables realization of the Otto cycle close to ideal, incr...

The world’s rapidly dwindling crude oil supplies, their rising cost and the rapid growing of automobile pollutions from fossil fuels have led to an intensive search for alternative fuels. Experiments were conducted to evaluate the performance and control the exhaust emissions from two-stroke, single cylinder, spark ignition (SI) engine, with alcohol blended gasoline (80% gasoline and 20% ethano...

Various methods are proposed in literature for the engine faults detection, based on the combination of simulation models with measured engine data. In order to be effective, these methods must be based, in author’s opinion, on detailed, reliable and validated simulation models, able to predict the faulty engine performance, by reproducing its actual work conditions. This is particularly import...

This research conducted a study specially to systematically analyze combined recovery of exhaust gas and engine coolant and related influence mechanism, including a detailed theoretical study and an assistant experimental study. In this research, CO2-based transcritical Rankine cycle (CTRC) was used for fully combining the wastes heats. The main objective of theoretical research was to search a...

In this paper, the influence of the gas exchange process on the diesel engine thermal overload is provided. Main components involved in the gas exchange process are discussed. The ambient conditions, the turbocharger performance, and the valve timing that affect the gas exchange process have been investigated. Experiments were conducted to simulate ambient conditions at different geographical l...

The Idle Stop and Go(ISG) system is a technology proposed as a solution for improving fuel efficiency and reducing exhaust gas in the traffic jam. A typical ISG system turns on or off the engine automatically depending on whether the host vehicle starts or stops. This type system can make fuel efficiency more badly because of frequent engine on/off operation. In this paper, the new Idle Stop an...

Reducing the exhaust emissions of an spark ignition engine by means of engine modifications requires consideration of the effects of these modifications on the variations of crankshaft torque and the engine roughness respectively. Only if the roughness does not exceed a certain level the vehicle do not begin to surge. This paper presents a method for controlling the air-fuel ratio for a lean bu...

Dilution of the intake air of the SI engine with the inert gases is one of the emission control techniques like exhaust gas recirculation, water injection into combustion chamber and cyclic variability, without scarifying power output and/or thermal efficiency (TE). This paper investigates the effects of using argon (Ar) gas to mitigate the spark ignition engine intake air to enhance the perfor...

This study was set out to characterize particulate emissions from transportation diesel engine in terms of heavy metals. The exhaust particulates from Mahindra DI engine were collected and analyzed at four different engine operating conditions namely idling, 40%, 70% and full load. It was found that as the load increases from idling to full load, the heavy metal content in particulates graduall...