Micromechanisms of ductile fracturing of DH-36 steel plates subjected to blast-induced pressure loads are studied experimentally using specially designed dynamic testing facilities. The sample geometry is such that it undergoes controllable fracturing, generally initiated near its center and grows first circumferentially and then radially. Selected fractured samples are sectioned normal to the ...

Stability of underground structures is assessed by comparing rock strength with induced stresses resulted from ground stresses. Rock mass surrounding the opening may fail either by fracture or excessive deformation caused. Accurate calculation of induced stresses is therefore fundamental in the stability analysis of an opening. Although numerical methods, particularly finite element method, are...

190 Abstract In this paper, a new analytical method for solving stable crack propagation problems in a ductile panel with a row of cracks, is presented. The main purpose of the present study is to estimate the maximum load carrying capacity of such panels accurately. The so called Elastic Plastic Finite Element Alternating Method (Pyo et al. (1994)) was extended to account for the propagating c...

For many fracture problems of practical engineering importance, the three-dimensional effects are significant and a three-dimensional analysis for the problems is thus required. In this paper, an endochronic theory coupled with anisotropic damage is first established, which is actually an elasto-plastic damage theory coupled with isotropic-nonlinear kinematic hardening. The ductile damage evolu...

We propose an efficient computational method to simulate two-phase flow in fractured porous media. Instead of refining the grid to capture the flow along the faults or fractures, we represent them as immersed interfaces with reduced model for the flow and suitable coupling conditions. We allow for non matching grids between the porous matrix and the fracture to increase the flexibility of the m...

Accepting the Beremin approach to the analysis of cleavage failure criteria the local fracture parameters have been calculated using FEM for Charpy type specimen. Two types, of model fenitic microstructures have been selected for presentation differing by carbide thickness and scatter of fracture toughness data. For the microstructures investigated the Weibull stresses (location parameters) wer...

This paper presents a fracture mapping (FM) approach combined with the extended finite element method (XFEM) to simulate coupled deformation and fluid flow in fractured porous media. Specifically, the method accurately represents the impact of discrete fractures on flow and deformation, although the individual fractures are not part of the finite element mesh. A key feature of FM-XFEM is its ab...

This paper was to verify the STAGS (general shell, geometric and material nonlinear) code and the critical crack-tip-opening angle (CTOA) fracture criterion for predicting stable tearing in cracked panels that fail with severe out-of-plane buckling. Materials considered ranged from brittle to ductile behavior. Test data used in this study are reported elsewhere. The STAGS code was used to model...