We present a physically based real-time water simulation and rendering method that brings volumetric foam to the real-time domain, significantly increasing the realism of dynamic fluids. We do this by combining a particlebased fluid model that is capable of accounting for the formation of foam with a layered rendering approach that is able to account for the volumetric properties of water and f...

OBJECTIVES To compare transmitted forces through ethylene vinyl acetate (EVA) mouthguard material and the same EVA material with gas inclusions in the form of a closed cell foam. METHOD EVA mouthguard materials with and without foam gas inclusions and 4 mm thick were impacted with a constant force from an impact pendulum. Various porosity levels in the foam materials were produced by 1%, 5%, ...

There are six major steps involved in responding to rapidly spreading poultry disease outbreaks including biosecurity, surveillance, quarantine, mass emergency depopulation, mass carcass disposal, and decontamination. Water-based foam is one of the methods used for mass emergency depopulation during severe disease outbreaks. This project evaluated the logistics of foam depopulation in two exper...

A finite element analysis (FEA) was made of the stress distribution in the heelpad and a running shoe midsole, using heelpad properties deduced from published force-deflection data, and measured foam properties. The heelpad has a lower initial shear modulus than the foam (100 vs. 1050 kPa), but a higher bulk modulus. The heelpad is more non-linear, with a higher Ogden strain energy function exp...

The use of graphene-based nanocomposites as electromechanical sensors has been broadly explored in recent times with a number of papers describing porous, foam-like composites. However, there are no reported foam-based materials that are capable of large dynamic compressive load measurements and very few studies on composite impact sensing. In this work, we describe a simple method of infusing ...

Field robots are widely used to accomplish a variety of tasks in many different fields. However, setting of the locomotive ability of these robots at the design phase may prevent the traversal of unknown rough terrain. To address this shortcoming of existing robots, we designed a robot that is able to modify its environment by using polyurethane foam to construct auxiliary structures to facilit...

Elastomeric polymer foam has been used widely in the automotive industry, especially for isolating unwanted vibrations. Such material is able to absorb unwanted vibration due to its combination of elastic and viscous properties. However, the ‘creep effect’, poor stress distribution and susceptibility to high temperatures are the main disadvantages of such a system. In this study, improvements i...

BACKGROUND Foam pads are increasingly used on force platforms during balance assessments in order to produce increased instability thereby permitting the measurement of enhanced posturographic parameters. A variety of foam pads providing different material properties have thus been used, although it is still unclear which characteristics produce the most effective and reliable tests. Furthermor...

Innovative top-of-the-line corrosion (TLC) inhibition techniques are being investigated as an alternative to batch treatment. A novel idea consists of injecting the corrosion inhibitor within a foam matrix. Previously, a “proof of concept” validation of the novel TLC mitigation method was successfully conducted in a small-scale laboratory setup. The findings in this paper present the next step ...