In fusion arc welding the final weld shape is influenced by welding parameters, mode of metal transfer, number of welding wires used and their arrangement in the contact tube, type of material to be welded, type of shielding medium and similar. In some articles, descriptions of investigations on the influence of the kind of material and the type of shielding medium used on the weld shape and si...

Solid free-form fabrication (SFF) based on gas–tungsten arc welding (GTAW) is one of the few rapid prototyping techniques that has the capability to build three-dimensional metallic parts. For this application, a mild steel (AISI 1018) was used. The most important problem in this process was to find the optimal process parameters. The goal is to build complex three-dimensional parts by depositi...

High strength steels Q690+Q550 were welded using three different welding wires without preheating by gas shielded arc welding process. Microstructural characteristics of weld metals and nucleation mechanism of acicular ferrite were investigated by means of scanning electron microscope (SEM), energy dispersive spectrum (EDS) and transmission electron microscope (TEM). The straight Y-groove test ...

Most of the metal additive manufacturing technologies are focused on high cost and high end applications. There is in need, a low cost additive manufacturing technology suitable for low and high end metallic applications. Robotic automated welding can be considered as an alternative to manufactured large scale metal parts with layer by layer approach. However, many obstacles have to be overcome...

In this work, the development and validation of a methodology for robotic welding with covered electrodes (SMAW) using a variation of the tool center point (TCP) model is shown. The covered electrode becomes part of the kinematic model of the robot as an additional prismatic joint, whose movement is determined by the electrode consumption or melting rate. This allows programming the trajectory ...

J. Cárcel-Carrasco; M. Pascual; M. Pérez-Puig; F. Segovia. ITM-Universitat Politècnica de València (Spain). Camino de vera s/n, 46022 Valencia (Spain). Corresponding author, Email: [email protected] This work compares the weldability of ductile iron when: (I) a root weld is applied with a tungsten inert gas (TIG) process using an Inconel 625 source rod and filler welds are subsequently applie...

This study assessed exposure to extremely low frequency (ELF) magnetic fields of welders and other metal workers and compared exposure from different welding processes. Exposure to ELF magnetic fields was measured for 50 workers selected from a nationwide cohort of metal workers and 15 nonrandomly selected full-time welders in a shipyard. The measurements were carried out with personal exposure...

Recently, open-type push-pull ventilation systems have been widely employed as effective substitutes for the conventional local exhaust ventilation system, and have prevailed at many welding workshops in Japan. In this study, the effect of the uniform velocity on carbon dioxide (CO2) shielding arc welding was examined by laboratory experiments. The ventilation system examined in the experiments...