The high-velocity oxygen-fuel (HVOF) spraying process was used to fabricate conventional WC-10Co-4Cr coatings and FeCrSiBMn amorphous/nanocrystalline coatings. The synergistic effect of cavitation erosion and corrosion of both coatings was investigated. The results showed that the WC-10Co-4Cr coating had better cavitation erosion-corrosion resistance than the FeCrSiBMn coating in 3.5 wt.% NaCl ...

in this paper the role of super paramagnetic iron oxide nanoparticles (spi) on platinum nanoclusters on activated carbon (pt/c) for electrocatalytic oxygen reduction reaction was considered. four composites of pt/c and super paramagnetic iron oxide nanoparticles were prepared with the same total composites weight and different loading of pt/c (1.2, 0.6, 0.4 and 0.3 mg ). the composite attached ...

reduced graphene oxide film was synthesized on a glassy carbon electrode by electro reduction of graphene oxide powders in aqueous solution. then platinum nano particles were deposited on reduced graphene oxide film that was deposited on the glassy carbon electrode via electro reduction of platinum salt. the physical morphology of the platinum on reduced graphene oxide film was evaluated by sca...

among human activities, motor vehicles play the most important role in air pollution. air pollution has negative impacts on people and on the environment. in this paper the effect of oxygen-enriched air (20.8%, 21.8%, 22.8%, 23.8% and 24.8%) and different bioethanol-gasoline blends (zero, 5%, 10%, 15%, 20% and 25%) in different engine speeds (1000 rpm, 2000 rpm and 3000 rpm) on the amount of po...

the electrocatalysis of the oxygen reduction reaction (orr) on carbon supportedpt-v (1:1) catalyst in polymer electrolyte fuel cells (pefc) was investigated. atan oxygen pressure of one atm an enhanced electrocatalytic property of pt-v/ccompared with pt/c is revealed. these results indicate the occurrence of adifferent electrocatalytic mechanism for the orr on pt/c and pt-v/c. anincrease of mas...

The formation of thermal NO and fuel type NO emission under the air staged combustion in a tower pulverized coal fired boiler that burners are arranged in the front and the rear wall are investigated in this paper. Effects of the distribution of oxygen in the main combustion zone on NOx are then analyze qualitatively. The results show that when the SOFA ratio is 34.98%, NOx yield is at the mini...

Output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. In this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. Effect of oxygen concentration at gas diffusion layer entrance, temperature and ...

The reduction of NOx-formation in biomass fired grate furnaces requires the development of numerical models. To represent the variety in scales and physical processes playing a role in the conversion, newly developed submodels are required. Here, a submodel for the reverse combustion process in the solid fuel layer on the grate is described. The submodel is shown to give good predictions for th...

Development of alternative ceramic oxide anode materials is a key step for direct hydrocarbon solid oxide fuel cells (SOFCs). Several lanthanide based layered perovskite-structured oxides demonstrate outstanding oxygen diffusion rate, favorable electronic conductivity, and good oxygen surface exchange kinetics, owing to A-site ordered structure in which lanthanide and alkali-earth ions occupy a...