This study investigates the impact hot extrusion process variables on physical and mechanical properties of Ti–3Al–V alloy The research examines four tube segments extracted from various hot-extruded tubes Ti–3Al–2.5V alloy, with an outer diameter (OD) 90 mm a wall thickness 20 mm. manufacturing involves expanding sleeves horizontal hydraulic press to achieve OD 195 mm, followed by heating 850–...

The hot deformation characteristics of AZ31 magnesium alloy rod extruded at temperatures of 300 °C, 350 °C and 450 °C have been studied in compression. The extruded material had a fiber texture with > < 0 1 10 parallel to the extrusion axis. When extruded at 450 °C, the texture was less intense and the > < 0 1 10 direction moved away from the extrusion axis. The processing maps for the material...

Background: Improvement of the mechanical and tribological properties due to extrusion can be attributed to the improved density and excellent bond strength due to high compressive stress. Methods: To avoid the product defects mathematically contoured cosine profiled die was used for the thermomechanical treatment. Improvement of mechanical characterization like density, hardness, compression t...

A comprehensive mathematical model of the hot extrusion process for aluminum alloys has been developed and validated. The plasticity module was developed using a commercial finite element package, DEFORM-2D, a transient Lagrangian model which couples the thermal and deformation phenomena. Validation of the model against industrial data indicated that it gave excellent predictions of the pressur...

The effects of rare earth addition and hot extrusion process on the grain refinement of magnesium alloy were studied. The as-cast Mg-6Al-1Zn (AZ61) alloy had the average grain size of ~ 64 µm and its microstructure consisted of α-Mg and Mg17Al12 phase. By partial substitution of Al with Gd to reach Mg-4.8Gd-1.2Al-1Zn alloy, it was observed that the Mg17Al12 phase disappeared and two new interme...

The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...