Calibration-free coulometric determination of K+ ions was realized using an all-solid-state thin-layer laminated cell with a simple laminate structure. The fabricated consists Ag/AgCl electrode, plastic spacer for positioning the aqueous sample solution, organic ion-selective membrane, and conducting polymer/carbon electrode. An originally prepared conducting-polymer-dispersed ink cast on condu...

A sodium dodecyl sulfate modified carbon paste electrode (SDS/CPE) was developed in this work based on the surface modification method. The modified electrode was prepared by immersing SDS/CPE in a nickel nitrate solution. This electrode showed a strong accumulation ability toward nickel ions. Then modified electrode was conditioned by potential recycling in a potential range of 0.2–0.8 V (vs. ...

a thin film of epinephrine (ep) was electrochemically deposited on the surface of glassy carbon electrode previously activated in nahco3 solution. the cyclic voltammograms of the modified electrode indicate that the surface confined ep are strongly dependent on the solution ph, as expected for quinone/hydroquinone functionalities. the ep-modified glassy carbon electrode exhibited catalytic acti...

The effect of the adsorption tetraethylammonium (TEA) cations, which present both ionic and organic characteristics, on reduction Cd(II) ions have been studied from dc ac measurements at dropping mercury electrode. resistance to charge transfer (Rct) Warburg coefficient (σ) parameters determined through impedance measurements. Thus, global velocity constant has obtained. process in perchloric m...

we used an effective electrochemical sensor for the determination of imipramine at ph 7.2 using a carbon nanocomposite electrode. the electrode has been designed by incorporation of montmorillonite nanoclay into the carbon ionic liquid electrode. the high sensitivity of 1.714 μa (μm)-1, two linear calibration ranges of 0.1–2 μm and 2-40 μm, and detection limit of 19 nm were achieved. the relati...

Carbon-based conductive materials have been recognized as promising alternatives to noble metals the electrode in optoelectronic devices. Herein, by utilizing energetic plasma ion implantation, Ni-doped TiN nanowire (NWs) modified graphitic carbon nanofibers (CNF) are designed and prepared candidates of platinum (Pt) counter for low-cost hybrid perovskite-based liquid-junction photoelectrochemi...

the glucose oxidase (gox) electrochemical sensors were used to detect a little amount of glucose. in this paper, the pure platinum plate (length of 5 cm and a width of 3 mm), the ag/agcl electrode and platinum electrode (diameter of 1 mm) were applied as a working electrode (w.e), reference electrode and auxiliary electrode sequential. factors measured, glucose concentration and ph is phosphate...

A modified electrode was prepared by modification of the carbon paste electrode (CPE) with graphene nano-sheets. The fabricated modified electrode exhibited an electrocatalytic activity toward gallic acid (GA) oxidation because of good conductivity, low electron transfer resistance and catalytic effect. The graphene modified CPE had a lower overvoltage and enhanced electrical current respect to...