This paper presents a discrete sliding-mode control scheme with feedforward compensation for the closed-loop regulation of the pulse-width modulated (PWM) inverter used in an uninterruptible power supply (UPS). The proposed feedforward controller can effectively improve the tracking performance of the PWM inverter. In designing the sliding-mode controller, we have taken load disturbance into co...

This paper describes a discrete adaptive state feedback controller used to load current control in terms of variable DC voltage of inverter. Controller was designed by using linear quadratic optimization method. Adaptive LQR was used because of non-stationarity of the control system caused by Voltage Matching Circuit VMC. Gain values of the adaptive controller were approximated by using an arti...

This paper presents design and analysis of a three phase induction motor drive using IGBT‟s at the inverter power stage with volts hertz control (V/F) in closed loop using dsPIC30F2010 as a controller. It is a 16 bit high-performance digital signal controller (DSC). DSC is a single chip embedded controller that integrates the controller attributes of a microcontroller with the computation and t...

Direct Torque Control of induction motor fed drives has become popular and widely used in industries due to fast and good torque response. Induction motors (IM) are simple in construction and are less sensitive to the motor parameters compared to other vector control methods. A new torque and flux control scheme called the direct torque control (DTC) has been introduced for induction motors. In...

This paper presents a power electronic interface (PEI) converter with three ports to connect a Photovoltaic system and a DC-microgrid to the main grid. The proposed converter is based on asymmetric Γ-source inverter, which makes two controllable ports in its DC side without utilizing any excessive DC/DC converters, which make it interesting for multi-port applications. The PEI system is expecte...

Three-level PWM inverters have been increasingly employed in industry and traction applications where high power and efficiency energy conversions are required. This paper presents a high performance control of a cage induction motor drive fed by a 100 Hp three-level IGBT inverter operating at a low switching frequency. A practical math model of the drive control system is established to aid in...

The main objective of the paper is to control the speed of an induction machine with scalar control technique. Induction motor (IM) because of its poor dynamic response in comparison to the DC motor drives. A Voltage Source Inverter (VSI), it is possible to control directly the stator flux linkage and the electromagnetic torque by the optimum selection of inverter switching vectors. The scalar ...

Multi-level inverter technology has emerged recently as a very important alternative in the area of high-power medium-voltage energy control. In this paper, the most important topologies like diode-clamped inverter (neutral-point clamped), capacitor-clamped (flying capacitor), and cascaded multi cell with separate dc sources. In this paper, we proposed a new multi-level inverter topology based ...

General power system supply only provides a fixed voltage and frequency, and its the inverter is mostly used to control AC motor speed with different frequencies. However, it normally requires a rectified DC into AC for the frequency variation. In this study, a digital signal processing technology is developed to generate a Sine Wave Pulse Width Modulation (SPWM) signal to replace the tradition...

ABSTRACT: In any PV based system, the inverter is a critical component responsible for the control of electricity flow between the dc source, and loads or grid. This paper presents a solar PV generation system integrated to the grid. The results of matlab modeling of the system detail the comparative operation of inverter topologies which are the conventional two level inverters and multilevel ...