A single-mode GaAlAs diode laser with over 90% output-coupling power and a large frequency-scanning range is reported. Based on grating feedback in the Littrow configuration, it is demonstrated that, with weak feedback (1.5 × 10(-3) in this experiment), over a 7.5-GHz continuous tuning range can be achieved around tuning gaps of free-running operation. A frequency self-locking effect is also de...

A novel quartz enhanced photoacoustic spectroscopy (QEPAS) trace gas detection scheme is reported in this paper. A cylindrical lens was employed for near-infrared laser focusing. The laser beam was shaped as a planar line laser between the gap of the quartz tuning fork (QTF) prongs. Compared with a spherical lens-based QEPAS sensor, the cylindrical lens-based QEPAS sensor has the advantages of ...

This letter introduces a three-dimensional manufacturing approach to the rapid processing of microfluidic structures using a scanning laser system. This technique takes advantage of the nonuniform distribution of laser power along its incident axis. The laser processing perpendicular to the specimen surface is realized by fine-tuning focus levels and laser intensity. A large number of microflui...

We have developed a simplified version of the side-pumped pulsed dye laser which has a spectral halfwidth of 1.25 GHz and a peak power of 10 kW at 600 nm. The basic laser consists of only four components (output mirror, dye cell, diffraction grating, and tuning mirror) and is exceptionally easy to align. Since the beam expander has been eliminated, the laser cavity can be made quite compact. Un...

The longest wavelength (~1.4 µm) emitted by a diamond Raman laser pumped by a semiconductor disk laser (SDL) is reported. The output power of the intracavity-pumped Raman laser reached a maximum of 2.3 W with an optical conversion efficiency of 3.4% with respect to the absorbed diode pump power. Narrow Stokes emission (FWHM <0.1 nm) was attained using etalons to limit the fundamental spectrum t...

The use and analysis of solid Fabry-Perot etalons for interferometry and laser control are discussed and supported with experimental data. Low angle scattering is found to be an important factor influencing finesse and peak transmission. Thermal tuning sensitivity and wedge-angle control with thermal gradients are analyzed and illustrated. Control of laser oscillations using a solid-state etalo...

We present a method of noise suppression of laser diodes by an unbalanced Michelson fiber interferometer. The unstabilized laser source is represented by compact planar waveguide external cavity laser module, ORIONTM (Redfern Integrated Optics, Inc.), working at 1540.57 nm with a 1.5-kHz linewidth. We built up the unbalanced Michelson interferometer with a 2.09 km-long arm based on the standard...

Recent experiments have explored the response of a single modeoptically injected QD laser. The experiments identify a domain ofbistability between two steady states at negative detuning and a Hopfbifurcation close to the locking threshold at positive detuning. More-over, the laser is stable for all injection levels at zero detuning. Theseobservations lead to a stability ...

Doped and undoped silica slabs were fabricated through the use of the sol-gel technique. Extended UV transmission was observed for HCl-catalyzed sol-gel silica. Under transverse pumping with a XeCl laser, narrow-linewidth (<0.9-nm) laser oscillation from silica slabs doped with coumarin 460 (C460) was achieved in a grating-resonator cavity configured in the grazing-indicence geometry. Tuning of...

We demonstrate electrical tunability of a fiber laser using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a tunable liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate an all-spliced laser cavity based on the liquid crystal photonic bandgap fiber mounted on a silicon ...