Salinity of soil and water is the most important agricultural hazard in arid and semi-aridregions. In saline soils, yield production directly influences by soluble salts in the root zone aswell as by shallow water table depth. The first step for reclamation of such soils is reducingsalinity to optimum level by leaching. The objective of this study was to develop a practicalmodel to estimate wat...

The use of porous bioresorbable scaffolds in the field of tissue engineering represents an alternative for the treatment of lesions and losses of biological tissues. This work evaluates the leaching salt effect of two different processes and polymers. Dense and porous scaffolds were prepared with poly(epson-caprolactone) (PCL) and poly(D,L-lactic acid-co-glycolic acid) (50/50) (PLGA50) by casti...

The bioleaching of metal sulfide has developed into a very important industrial process and understanding the microbial dynamic is key to advancing commercial bioleaching operations. Here we report the first quantitative description of the dynamic of active communities in an industrial bioleaching heap. Acidithiobacillus ferrooxidans was the most abundant during the first part of the leaching c...

Remediation of heavy metal polluted sediment by extracting the metals with sulfuric acid can be performed as follows: abiotic suspension leaching, microbial suspension leaching, abiotic solid-bed leaching, and microbial solid-bed leaching. Abiotic leaching means that the acid is directly added, while microbial leaching means that the acid is generated from sulfur by microbes (bioleaching). Thes...

The high solubility of copper sulphide minerals is an issue in the cyanidation of gold ores. The objective of this study was to quantify the effect of individual copper sulphide minerals on the Hunt process, which showed advantages over cyanidation. High purity djurleite, bornite and chalcopyrite, with a P70 of 70–74 microns, were mixed with fine quartz and gold powder (3–8 micron) to obtain a ...

The dissolution kinetics of the Abu-Tartur phosphate rock using dilute hydrochloric acid has been investigated. The influence of acid concentration, liquid/solid ratio, particle size and temperature was studied to explore the dissolution kinetics of phosphate rock. It was found that the leaching rate increases with increasing the acid concentration, liquid/solid ratio, temperature and decreases...

This paper describes the characterization and leaching behaviour of precious metal present from electronics scrap to obtain liquor which can be treated through hydrometallurgical techniques to purify the metals. The results of this study points out the technical feasibility of the recovery of the metals. The blank sample was characterized by X-ray florescence. This paper will also present the r...

The application of a catalytic-activated carbon to the solidification/stabilization (S/S) process for immobilization of phenol and 2-chlorophenol and catalytic decomposition was investigated. The effect of the catalytic-activated carbon, in amounts of 0.25-1% (by dry sand wt.), on the leaching of phenol and 2-chlorophenol was studied. H2O2 was added as a source of oxygen in the amounts of 1 or ...

Stabilization efficiencies of spinel-based construction ceramics incorporating simulated nickel-laden waste sludge were evaluated and the leaching behavior of products investigated. To simulate the process of immobilization, nickel oxide was mixed alternatively with gamma-alumina, kaolinite, and hematite. These tailoring precursors are commonly used to prepare construction ceramics in the build...

A hydrometallurgical process for recycling spent Zn-MnO2 batteries was developed, involving leaching with sulfuric acid, purification by precipitation and metals separation for further recovery. Leaching of zinc oxide was easily attained while for manganese oxide was rather difficult depending on temperature and acid concentration. At 90oC and with the liquid/solid ratio of 20 L/kg, more than 9...