A colorimetric pH measurement of seawater samples using a light source comprising a three light-emitting diodes (TLED) detector and meta-cresol purple (mCP) as an indicator was investigated. The molar absorption ratios (e1, e2, and e3/e2) for mCP using the TLED detector at 25°C were determined to be 0, 1.9994, and 0.1010, respectively. Next, the pH values of 2-amino-2-hydroxymethyl-1,3-propaned...

To maintain typical textile properties, smart designs of light emitting devices are printed directly onto textile substrates. A first approach shows improved designs for alternating current powder electroluminescence (ACPEL) devices. A configuration with the following build-up, starting from the textile substrate, was applied using the screen printing technique: silver (10 µm)/barium titanate (...

Efficient phosphorescent orange, blue and white organic light-emitting devices (OLEDs) with non-doped emissive layers were successfully fabricated. Conventional blue phosphorescent emitters bis [4,6-di-fluorophenyl]-pyridinato-N,C(2')] picolinate (Firpic) and Bis(2,4-difluorophenylpyridinato) (Fir6) were adopted to fabricate non-doped blue OLEDs, which exhibited maximum current efficiency of 7....

We report an effective method to extract light from quantum-dot light emitting diodes (QLEDs) by embedding an internal nano-scattering pattern structure. We use finite-difference time-domain method to analyze the light extraction efficiency of red QLEDs with periodic, quasi-random, and random internal nano-scattering pattern structures. Our simulation results indicate that random internal nano-...

InP-based 1 .6 tm microcavity light emitting diodes (MCLEDs) have been designed, fabricated and characterized. Oxideconfined MCLEDs with lateral aperture size down to 1 jtm have been realized with enhanced output slope efficiency and excellent spectral and spatial properties. Both mirror-free cylindrical MCLEDs with oxide-aperture and 3D MCLEDs have been fabricated and a maximum output power of...

objectives: the aim of this in-vitro study was to assess the thermal effect of light emitting diode (led) light curing unit on the enamel etching time. materials and methods: three treatment groups with 15 enamel specimens each were used in this study: g1: fifteen seconds of etching, g2: five seconds of etching, g3: five seconds of etching plus led light irradiation (simultaneously). the micro ...

During the cementation of ceramic veneers the polymerization of resin cements may be jeopardized if the ceramics attenuate the irradiance of the light-curing device. The aim of this study was to evaluate the effect of different types and thicknesses of ceramic veneers on the degree of conversion of a light-cured resin-based cement (RelyX Veneer). The cement was light-cured after interposing cer...

Field experiments were conducted to evaluate plant population and N-fertilizer effects on yield and yield components of maize (Zea mays L.). Three levels of plant populations (53000, 66000, and 800,000 plants ha⁻¹ corresponding to spacings of 75 × 25, 60 × 25, and 50 × 25 cm) and 4 doses of N (100, 140, 180, and 220 kg ha⁻¹) were the treatment variables. Results revealed that plant growth, ligh...

This study evaluated the polymerization shrinkage, flexural and compressive properties of low-shrinkage resin composites. For the study, four methacrylate-based and one silorane-based resin composites were light cured using three different light-curing units (LCUs) and their polymerization shrinkage, flexural (strength (FS) and modulus (FM)) and compressive (strength (CS) and modulus (CM)) prop...