The influence of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel stainless-steel alloy (Fe-17Cr-7Mn-4Ni) has been investigated. The alloys containing 0.1 wtYo or more nitrogen are fully austenitic at room temperature; those containing less nitrogen consist of a mixture of austenite, martensite and S-ferrite. The alloys containing less than 0.2 wtYo nitrogen are m...

The decomposition of martensite during tempering or ageing is an important phenomenon as it leads to changes in the mechanical properties. These changes could take place during both steel manufacturing or in-service. Thus, their understanding is required to predict the material performance. Recent advances in the development of local electrode atom probes has led to a significant increase in th...

The redistribution of carbon after tempering of a novel nanocrystalline bainitic steel consisting of a mixture of supersaturated ferrite and retained austenite has been analyzed by atom probe tomography. No direct evidence supporting the additional carbon enrichment of austenite beyond that initially achieved during the bainite heat treatment was obtained during subsequent tempering of this hig...

in the present research, in contrast to the available papers, not only the superelasticity but also the shape memory effects are taken into account in determination of the impact responses. at the same time, in addition to modifying brinson’s model for the shape memory alloys (smas), to include new parameters and loading events, and hertz contact law, distributions of the sma phases are conside...

Abstract Dual-phase steels (DP steels) consist of ferrite and hard martensitic phase. For the high strength good formability, they are widely used in automotive applications. Compared with DP lower strength, DP1180 is more special for volume fraction martensite higher than that ferrite. In this paper, evolving plastic yielding behaviours insight into their microscale mechanisms were studied by ...

We present here results of temperature dependent high resolution synchrotron x-ray powder diffraction study of sequence of phase transitions in Ni2MnGa. Our results show that the incommensurate martensite phase results from the incommensurate premartensite phase, and not from the austenite phase assumed in the adaptive phase model. The premartensite transforms to the martensite phase through a ...

Modern TRIP assisted steels contain retained austenite with carbon concentrations in excess of 1 wt-%. Some of their mechanical properties, in particular the toughness and ductility, rely on the diffusionless transformation of this austenite into high-carbon martensite, induced by stress and strain. The properties can be excellent in spite of the fact that freshly formed high-carbon martensite ...

The tensile and Charpy impact properties of four strip samples from two different B-added low-C ultra-high-strength steel strips (Al-treated Ti-treated), coiled at temperature ranges (360–380 °C 450–460 °C), have been evaluated correlated to the microstructural parameters, dislocation density, intensity high-angle boundaries. effects coiling temperatures on evolution mechanical discussed. volum...

The effect of deformation temperature on the mechanical properties 1-GPa-grade TRIP steels with different retained austenite (?R) morphologies was studied. dependence deformation-induced martensitic transformation behavior also investigated. uniform elongation below room relatively large in needle-like ?R steel, whereas tensile strength at each almost same as it independent morphology. better s...

The conventional liquids have some limitations regarding the thermal properties. The nanoparticles addition is one of the techniques which can modify them. In this research, heat transfer coefficient (h) and pressure loss (Δp) of various nanofluids containing Al2O3, SiO2 and MgO nanoparticles dispersed in water in an annular tube with constant wall temperature were numerically considered. Accor...