A numerical framework has been proposed to model the interacting effects of mixture non-ideality and mass transfer on hydrodynamics of a multiphase system using CFD methods.Mass transfer during condensation and vaporization is modeled by chemical potential at the liquid-vapor interface. Species mass transfers are related to the diffusion at the interface which in turn is related to the conc...

This paper demonstrated a fluorescence-indicated mass transfer liquid-liquid extraction process based on a droplet microfluidic system. Analysis of the droplet-based liquid-liquid extraction process based on the description of mass transfer into or out of droplets is conducted. The relationship between the extraction efficiency and the droplet size is measured and the mass transfer coefficient ...

Experiments were conducted to determine the influence of local vapor quality on local heat transfer coefficient in flow boiling in an array of microchannels. Additionally, the variation of local heat transfer coefficient along the length and width of the microchannel heat sink for given operating conditions was investigated over a range of flow parameters. Each test piece includes a silicon par...

Extraction of Fe(III) from aqueous solution using Trin-butyl Phosphate (TBP) as carrier needs a highly acidic medium (>6N) as it favours formation of chelating complex FeCl3.TBP. Similarly, stripping of Iron(III) from loaded organic solvents requires neutral pH or alkaline medium to dissociate the same complex. It is observed that TBP co-extracts acids along with metal, which causes reversal of...

Accurate and optimum usage of energy sources is gaining importance all over the world due to the increase of energy need and limited energy sources. Optimum usage of energy sources is not only necessity for energy conversion systems, but also design and production of energy conversion devices. Therefore optimization of condensers is very important for HVAC systems which require as possible as m...

The characteristics of local heat transfer and pressure drop were investigated experimentally for the vertical up-flow boiling of refrigerant R1234yf in two types of aluminum multi-port extruded tubes having 16 channels with a crosssection of 0.91 × 0.21 mm (tube A) and 40 channels with a cross-section of 0.34 × 0.21 mm (tube B). At an evaporating temperature of 15 °C, the local heat transfer c...

Min et al. (2009) presented two complementary techniques that use the diffusion approximation to allow efficient Monte-Carlo radiation transfer in very optically thick regions: a modified random walk and a partial diffusion approximation. In this note, I show that the calculations required for the modified random walk method can be significantly simplified. In particular, the diffusion coeffici...

The condensation heat transfer coefficient of R134a was experimentally studied inside two smooth and four micro-fin tubes. The working conditions and structural parameters of the test tubes were selected as the influencing factors, and the experiment was conducted under mass velocities of 400–1100 kg·m−2·s−1, condensation temperatures of 35–45 ◦C and water-testing Reynolds numbers of 8000–22,00...

Resins are used in nuclear power plants for water ultrapurification. Two approaches are considered in this work: column experiments and simulations. A software called OPTIPUR was developed, tested and used. The approach simulates the onedimensional reactive transport in porous medium with convectivedispersive transport between particles and diffusive transport within the boundary layer around t...

Resins are used in nuclear power plants for water ultrapurification. Two approaches are considered in this work: column experiments and simulations. A software called OPTIPUR was developed, tested and used. The approach simulates the onedimensional reactive transport in porous medium with convectivedispersive transport between particles and diffusive transport within the boundary layer around t...