We report on a new type of micromachined probe card which utilizes fritting process to make contact to Al or Cu pads with low contact force smaller than 10 mN. Microcantilevers contacting the pad surface with buckling deformation and can keep uniform contact force were designed and fabricated. Mechanical properties of the micro-cantilever was measured and a good agreement with theoretical buckl...

Atomic force microscope-(AFM-) based indentation tests were performed to examine mechanical properties of parallel singlecrystal silicon nanolines (SiNLs) of sub-100-nm line width, fabricated by a process combining electron-beam lithography and anisotropic wet etching. The SiNLs have straight and nearly atomically flat sidewalls, and the cross-section is almost perfectly rectangular with unifor...

Themechanical behaviorof grapheneflakesunderboth tension and compression is examined using a cantilever-beam arrangement. Twodifferent sets of samples are employed.One consists of flakes just supported on a plastic bar. The other consists of flakesembeddedwithin theplastic substrate.Bymonitoring the shift of the 2DRaman linewith strain, information on the stress transfer efficiency as a functio...

The response of an F-actin network at the air-buffer interface to nonlinear compression is studied. We observe two distinct classes of behavior: a mechanically induced structural reorganization of the monolayer and a subsequent reversible, nonlinear mechanical response. Measurements of pressure area isotherms, bulk modulus, and the epifluorescence microscopy of tracer beads provide evidence tha...

In this article, the effect of size-dependent on the buckling and vibration analysis of functionally graded (FG) double-layer boron nitride plate based on classical plate theory (CPT) under electro-thermo-mechanical loadings which is surrounded by elastic foundation is examined. This subject is developed using modified couple stress theory. Using Hamilton's principle, the governing equations of...

Nanotechnology is emerging to be one of the most important scientific disciplines that physics, chemistry and biology truly overlap with each other. Over the last two decades science and technology have witnessed tremendous improvement in the hope of unveiling the true secrets of the nature in molecular or atomic level. Today, the regime of nanometer is truly reached. ZnO is a promising materia...

Fiber-reinforced laminated composites are frequently preferred in many engineering projects. With the development in production technology, the using of the fiber reinforced laminated composites has been increasing in engineering applications. In the production stage of the fiber-reinforced laminated composites, porosities could be occurred due to production or technical errors. After a level o...

It is well known that buckling instabilities occur when elastic solids are subject to compressive stresses. However, this does not preclude the occurrence of instabilities in systems subject to global tensile loads. Such tensile instabilities may be caused by certain discontinuities (geometrical or material) which re-distribute the stresses applied on its boundary, generating local compressive ...

Arc welding is an important joining process widely used in many industrial applications including production of automobile, ships structures and metal tanks. In welding process, the moving electrode causes highly non-uniform temperature distribution that leads to residual stresses and different deviations, especially buckling distortions in thin plates. In order to control the deviations and in...

Computer-based simulations are nowadays widely exploited for the prediction of the mechanical behavior of different biomedical devices. In this aspect, structural finite element analyses (FEA) are currently the preferred computational tool to evaluate the stent response under bending. This work aims at developing a computational framework based on linear and higher order FEA to evaluate the fle...