The usage of wastes of bagasse would be admirable from environmental and solid waste management point of view. Thus, herein, this data set present a facile method for providing an adsorbent from mixture of bagasse-bentonite. The prepared adsorbent was applied to remove Pb2+ from aqueous solution. It was conducted in laboratory scale using completely randomized design with variations in mixed ma...

This research work investigates the efficiency of H3PO4and KOH impregnated jackfruit leaf powder based carbon as adsorbent to remove Ni from wastewater. The removal characteristics of Nickel using both the adsorbents were investigated under various operating variables like contact time, adsorbent dosage, initial metal concentration, solution pH, temperature and stirring speed. The results showe...

The present research reports the synthesis of poly-N-isopropylacrylamide / mesoporous carbon composites, prepared by radical polymerization of N-isopropylacrylamide inside mesoporous carbon pores functionalized with carboxylic groups. The deposition of poly-N-isopropylacrylamide on mesoporous carbon was confirmed by FT-IR spectroscopy, TEM, N2-sorption measurements. The mesoporous carbon materi...

ordered mesoporous carbon cmk-3 (omc) have been synthesized using mesoporous sba-15 silica as template and modified with cobalt carbonate. morphologies and surface texturing of materials werecharacterized by x-ray diffraction (xrd), scanning electron microscopy (sem) and n2 adsorption-desorptionisotherms. the cobalt modified ordered mesoporous carbon were found to have a surface area of 490.06m...

The exploitation and employment of agricultural waste in polluted water treatment are one the most important cost-effective approaches. Therefore, a novel mesoporous spongy adsorbent/photocatalyst was successfully synthesised through grafting nickel cobalt oxides nanocomposites with wheat straw-derived SiO2 (WSS). Nickel were added to enhance functionality SiO2. This synthesis methodology prese...

In this work, adsorption kinetics were investigated in order to remove the acid blue 62 off the aqueous solutions using mesoporous silicate SBA-15 loaded with tannic acid (tannin-SBA-15). Nitrogen adsorption and desorption test (BET), X-ray diffraction (XRD) and Fourier transform infra-red spectroscopy (FT-IR) analysis characterize synthesized composite. The impacts of some parameters such as P...

In this study, the adsorption behavior of anionic dyes from aqueous solution onto mesoporous carbon material (CMK-1) and modified with polymer (PANI/CMK-1) has been investigated as a function of parameters such as adsorbent dose (0.08-0.8 g/L), solution pH 3–10, contact time and initial concentration (10-100 mg/L). The influence of these parameters on the adsorption capacity has been studied us...

Calcium alginate beads doped with hydrazine sulphate-treated red mud are investigated as adsorbent for extracting lead ions from water using batch methods of extraction. Different extraction conditions are optimised for maximum lead extraction. Substantial amount of lead is removed, and the adsorption ability is found to be 138.6 mg/g. Surface characterization using FTIR, EDX, and FESEM confirm...

The objective of this research was to seek a cost effective solution to prepare adsorbents for nitrogen oxide from surplus sludge. Leaf litter and powder coal ash were used as cheap and easily available additives. An adsorbent for nitrogen oxide was prepared by pyrolysis of dried sludge mixed with zinc chloride. Under optimum pyrolysis conditions of 375°C for 90 min and a zinc chloride content ...

Batch sorption experiments were carried out using jackfruit seed powder (JSP), for the removal of Methylene Blue (MB) from dyeing synthetic effluent waste water. Effects of process parameters pH, adsorbent mass, adsorbate concentration, contact time and temperature were studied. The adsorption process attains equilibrium within 60 minutes. The amount of MB adsorbed per unit mass of the adsorben...