This Investigation studies the Mechanical and Tribological behaviour [ i.e dry sliding behaviour] of Al matrix composites reinforced with SiC and Gr particulate up to 10%, to study the effect of reinforcement, Load, Sliding speed and Sliding distance on stir cast Al-SiC and Al-Gr Metal matrix composites. Parametric studies indicate that the hardness, tensile strength of Al-SiC composite is grea...

Light weight materials coupled to the need for cost-effective processing have combined to create a significant opportunity for aluminium powder metallurgy as its increasing interest. Aluminium alloy (AA 2219) metal matrix composite reinforced with multi walled carbon nanotube (MWCNT) produced by powder metallurgy (P/M) technique was analysed and CNTs dispersion were traced. The micro hardness a...

Deformation-processed metal-metal composites (DMMC) of Mg-Li alloys containing steel reinforcing fibers were prepared by infiltrating a preform of steel wool with the molten matrix. The Li content was varied to control the crystal structure of the matrix; Mg-4 wt pct Li is hexagonal close packed (hcp), while Mg-12 wt pct Li is body-centered cubic (bcc). The low carbon steel used as the reinforc...

Metal-matrix composites (MMCs) are used in a large number of high-performance applications. In 2004, more than 3.5 million kg of MMCs were used and the number is increasing rapidly, with an annual growth rate exceeding 6%. Most of the current MMC applications are in ground transportation, aviation, electronics, and sports industries. The initial discovery of the synthesis of cast aluminum-matri...

Typically many grains are averaged to determine strains using X-ray diffraction. In a composite material, however, as the microstructure approaches the fiber diameter, approximations based on a few grains may be misleading. Polychromatic microbeam X-ray diffraction on beamline 7.3.3 at the Advanced Light Source was used to observe relative strain and orientation within hundreds of grains of a m...

Production of aluminum matrix composites is widespread because these material provide enhanced mechanical properties compared to aluminum. One the most important parameters of metal matrix composite production is uniform distribution of reinforcing nanoparticles in matrices using the stir-casting method. Second is ensuring high wettability, which is determined by evaluating the properties of ma...

Al7075 alloy reinforced with h-Boron Nitrate (BN) composites were processed by stir casting technique. The produced composite was subjected to microstructural studies using OLYMPUS -BX51M, tensile, hardness, density and wear tests. Tensile strength and hardness were found to increase by 12.8% and 20% respectively due to increased dislocation density with the addition of reinforcement. Microstru...

A new severe plastic deformation (SPD) based technique entitled Accumulative channel-die compression bonding (ACCB) is proposed for the fabrication of high strength multi-layered Al/Cu composites for the first time. In order to primarily demonstrate the capabilities of ACCB in the fabrication of metal matrix composites (MMCs), AA 1050 and pure Cu strips were processed. The primary Al/Cu sandwic...

Nickel in elemental form or alloyed with other metals or materials has made significant contribution to our present day society. Nickel and nickel alloys are the class of advanced material that are are identified as candidate materials for marine applications and vitally important to aerospace, automotive industries because of their ability to withstand a wide variety of severe operating condit...

Article history: Received 28.3.2013 Received in revised form 26.4.2013 Accepted 29.4.2013 Aluminum matrix composites containing 55% SiC particle reinforcing phase/SiC reinforcement phase particle and Kovar alloy 4J29 were chosen as the base metals. After nickel plating on the surface of SiCp/Al, two kinds of materials were soldered together by using Zn-Cd-Ag-Cu as the filler metal and ZnCl2 as ...