Laser cladding is a promising surface treatment for refurbishing worn-out cast-iron brake rotors. Previous studies on laser-cladded rotors have demonstrated their extensively higher wear and greater airborne particle emissions, compared with traditional cast iron In order to overcome this, commercial non-asbestos organic (NAO) material tested against Fe-based Two low-metallic pad materials are ...

The results of a metallographic study of grey cast iron water pipes are reported. These pipes had been installed between 1885 and 1973 in eight different water systems. Each pipe had been extracted during scheduled maintenance or failure repairs to provide data for a larger study to produce a methodology for determining the residual life of grey cast iron pipes. This metallographic study was co...

Developing human-centered agent architectures requires the integral consideration of architectural flexibility, teamwork adaptability, and context reasoning capability. With the integration of various forms of team intelligence including shared teamwork process and progress, dynamic context management and information dependency reasoning, and recognition-primed collaborative decision mechanism,...

A fractured nutcracker was examined for determining the root cause/s for premature fracture/failure. This is one of the common tools used typically for cracking hard nuts. In this study, metallurgical failure analysis techniques namely, visual inspection, optical microscopy, SEM, and hardness tests were used in investigating the broken product. From the metallurgical analysis, it was determined...

The tubulization process of amorphous carbon nanopillars was observed in situ by transmis-sion electron microscopy. Amorphous carbon nanopillars were transformed into graphitic tubules by annealing at 650-900 degrees C in the presence of iron nanoparticles. A molten catalyst nanoparticle penetrated an amorphous carbon nanopillar, dissolving it, and leaving a graphite track behind. An iron nanop...

This thesis deals with the heat evolution during solidification and its relation to the formation of porosity. It intends to improve the current understanding of the formation of porosity in cast materials with special interest in nodular cast iron and the spray forming process. Two different systems, a Fe-based alloy, Cast iron, and a Ni-based alloy, Inconel 625, are examined. The effect on th...

The article deals with measurements of linear changes of castings from foliated graphite cast iron and Al-alloys during their solidification. For this purpose the measuring apparatus, which applies a dilatometer of Polish provenience, was built up. Dilatation curves of graphite cast iron and Al-alloys were acquired during the casting process. In the case of Al-alloys the influence of chemical c...

This paper describes design and analysis of Spur gear. In the present work, it is proposed to substitute the metallic gear of sugarcane juice machine with plastic gears to reduce the weight and noise. For the purpose of two different types of plastic materials were considered namely Nylon and Polycarbonate and their viability are checked with their counterpart metallic gear (Cast iron). Based o...