OBJECTIVE To compare wear performance and resistance to crack propagation (K1C) of commercial restorative materials and their flowable variations. A potential correlation between three-body wear and fracture toughness, modulus of elasticity, fracture work, Vickers hardness, and filler content was investigated. METHOD AND MATERIALS Seven restoratives (five composites, one ormocer, and one comp...

Different modification routes using fly ash-based calcium silicate (FACS) with starch/sodium stearate were explored to mitigate the negative effect of filler on paper strength and allow for improved filler content. The morphology of the modified fillers and the properties of the filled paper were investigated. The modification route was found to be critical to the amount of starch/sodium steara...

The microstructures and weldability of a brazed joint of 1Cr18Ni9Ti austenitic stainless steel with BNi-2, BNi82CrSiBFe and BMn50NiCuCrCo filler metals in vacuum were investigated. It can be observed that an interdiffusion region existed between the filler metal and the base metal for the brazed joint of Ni-based filler metals. The width of the interdiffusion region was about 10 μm, and the mic...

Polyethylene nanocomposites with silica, alumino-silicate and thermally reduced graphene were generated by adding pro-oxidant additive. Additive resulted in early degradation of pure polymer, however, the degradation was delayed in the presence of fillers. Graphene resulted in maximum extent of enhancement of peak degradation temperature (13-14 °C depending on the additive content) followed by ...

By employing an idealized model of a polymer network and filler, we have investigated the stress-strain behavior by tuning the filler loading and polymer-filler interaction in a broad range. The simulated results indicate that there actually exists an optimal filler volume fraction (between 23% and 32%) for elastomer reinforcement with attractive polymer-filler interaction. To realize this rein...

Filler –matrix coupling determines, to a large extent, the mechanical strength and clinical longevity of dental composites. Incorporation of filler into resin matrix greatly influences and improves material properties provided that filler particles are bonded to polymer matrix or otherwise it may actually weaken the resin. Benefits of filler content presence are increased hardness, strength, ra...

The use of fillers in paper products can provide cost and energy savings, improved paper properties, increased productivities, and specifically desired paper functionalities. There are many problems associated with the use of fillers, such as unsuitability of calcium carbonate fillers in acid papermaking, negative effects of filler loading on paper strength, sizing, and retention, and tendencie...