As the second part to a paper presented at the 2004 SMTA Pan Pacific Symposium, this paper further summarizes the results from technical qualification of the Ni/Pd/Au process. Whereas the previous paper examined the wire bonding capabilities of this surface finish, this second paper focuses specific attention to BGA applications. In these investigations, the solder joint integrity is measured u...

Rene88 samples were investigated using atom probe tomography and x-ray diffraction using a monochromated synchrotron beam with different energy values to determine the preferred site occupancy of various alloying elements within the ordered γ’ precipitates. Samples were solutionized and cooled at 24 degree C/min with subsequent aging at 760 degrees C. The synchrotron-based x-ray diffraction res...

A simple and rapid spectrophotometeric procedure has been established for quantization of Ni(II) at trace levels. The reagent isonicotinohydroxamic acid (INHA) reacts with nickel(II) at pH < 10 and form a 1:2 lemon green complex. The complex has a maximum absorption at 610 nm with the molar absorptivity of 1.44x10 L molcm. Beer’s law is obeyed over the range of 0.32-4.80 μgmL. The Sandell’s sen...

INTRODUCTION The aim of this study was to compare cyclic fatigue resistance of four nickel-titanium rotary systems and to evaluate their surface, fractographic, and matrix morphology. METHODS Four models of endodontic rotary files (EasyShape [Komet/Gebr. Brasseler, Lemgo, Germany], ProTaper [Dentsply Maillefer, Ballaigues, Switzerland], NRT [MANI Inc, Toshigi-Ken, Japan], and AlphaKite [Komet...

Original scientific paper Plasma Electrolytic Oxidation (PEO) of NiTi alloy was studied in the electrolyte consisting generally of concentrated orthophosphoric acid with an addition of copper II nitrate. The PEO process was used to obtain a nanostructured coating on the Nitinol surface. The surface layer analyses methods, such as scanning electron microscopy (SEM) with the energy-dispersive X-r...

Nickel silicides were formed on Si (100) substrates and CVD grown Si0.9Ge0.1/Si layers by low thermal budget annealing of evaporated Ni films to evaluate their utility for ultra shallow junctions. The phase formation and microstructure of silicides formed using conventional furnace and rapid thermal annealing were studied by x-ray diffraction, Rutherford backscattering (RBS), x-ray photoelectro...

In the current work, we report a series of bifacial dye-sensitized solar cells (DSSCs) that provide power conversion efficiencies of more than 10% from bifacial irradiation. The device comprises an N719-sensitized TiO2 anode, a transparent nickel selenide (Ni-Se) alloy counter electrode (CE), and liquid electrolyte containing I(-)/I3(-) redox couples. Because of the high optical transparency, e...

Since the end of the nineteenth century, automated root canal instrumentation has been available, but systems had many problems. The challenges of increased canal blockage, instrument breakage, and insufficient canal debridement were related to the use of stainless steel instruments and have been dramatically improved with the introduction of nickel-titanium (NiTi) files. The first useable NiTi...

An intermetallic nickel-titanium alloy, 60NiTi (60wt%Ni, 40wt%Ti), is shown to be a promising candidate tribological material for space mechanisms. 60NiTi offers a broad combination of physical properties that make it unique among bearing materials. 60NiTi is hard, electrically conductive, highly corrosion resistant, readily machined prior to final heat treatment, and is non-magnetic. Despite i...

A chemical and a physical method have been applied for the preparation of chromium-nickel alloy nanoparticles. These particles were designed to be used for controlled magnetic hyperthermia applications. Microemulsions with Ni2+ and Cr3+ and/or NaBH4 as precursors were prepared using the isooctane/CTAB, n-butanol/H2O system. The samples of CrxNi1-x nanoparticles with the desired composition were...