We report several experiments under ultrahigh vacuum conditions that elucidate the role of oxygen in the functioning of silicon carbide field-effect gas sensors with nonporous platinum gates. The devices studied are shown to be sensitive both to hydrogen and to propene. All of the results are consistent with oxygen acting through its surface reactions with hydrogen. Three specific aspects are h...

Ion beam modification to effect ion beam mixing without changing morphology was investigated as a means to improve the electrochemical performance of Ge thin film electrodes for rechargeable Li batteries. As a result of a minimum tenfold increase in the strength of adhesion of the Ge film to the current collector (substrate), the ion beam-mixed electrodes exhibited stable specific capacities of...

n-Propylsulfonic acid-functionalized porous and nonporous silica materials are evaluated in the ring-opening polymerization of -caprolactone. All catalysts allow for the controlled polymerization of the monomer, producing polymers with controlled molecular weights and narrow polydispersities. Polymerization rates are low, with site-time yields generally 1-3 orders of magnitude lower than metalb...

We have studied the offset printing of liquid polymers curable by exposure to ultraviolet light onto flat and unpatterned silicon and glass substrates. The interplay of capillary, viscous, and adhesion forces dominates the dynamics of ink transfer at small feature sizes and low capillary number. For smooth and nonporous substrates, pattern fidelity can be compromised because the ink contact lin...

We have developed a letterpress technique capable of printing polymer films with micrometer scale feature sizes onto flat or spherically shaped nonporous substrates. This printing technique deposits polymer only in desired regions thereby eliminating subsequent developing and subtraction steps. Flat or curved printing plates, which are fabricated from either rigid or deformable materials, are u...

During an investigation conducted December 17-20, 2001, we collected environmental samples from a U.S. postal facility in Washington, D.C., known to be extensively contaminated with Bacillus anthracis spores. Because methods for collecting and analyzing B. anthracis spores have not yet been validated, our objective was to compare the relative effectiveness of sampling methods used for collectin...

The aim of the study was to evaluate the possibility to obtain guided bone regeneration with two types of physical barriers (calcium sulfate and PTFE nonporous barrier) in surgical defects created in rat parietal bones. In the right parietal bone the calcium sulfate barrier filled out the whole defect and in the left parietal bone the barrier of PTFE was positioned in the floor and externally t...

Capillary columns packed electrokinetically with 1.5-μm nonporous octadecylsilica particles are used to achieve rapid separations with high efficiencies. A mixture containing five polycyclic aromatic hydrocarbons (PAHs) as test compounds is separated in less than 5 s with 28 kV applied to a column with a packed length of 6.5 cm (10 cm total length). A sample containing 16 PAHs (classified as pr...

We report the first characterization study of commercial prototype carbon nanotube (CNT) membranes consisting of sub-1.27-nm-diameter CNTs traversing a large-area nonporous polysulfone film. The membranes show rejection of NaCl and MgSO4 at higher ionic strengths than have previously been reported in CNT membranes, and specific size selectivity for analytes with diameters below 1.24 nm. The CNT...

The biphasic poroviscoelastic (BPVE) model was curve fit to the simultaneous relaxation of reaction force and lateral displacement exhibited by articular cartilage in unconfined compression (n=18). Model predictions were also made for the relaxation observed in reaction force during indentation with a porous plane-ended metal indenter (n=4), indentation with a nonporous plane ended metal indent...