A model of a linear aerospike rocket nozzle that consists of coupled aerodynamic and structural analyses has been developed. A nonlinear computational fluid dynamics code is used to calculate the aerodynamic thrust, and a three-dimensional finite-element model is used to determine the structural response and weight. The model will be used to demonstrate multidisciplinary design optimization (MD...

Process transitions are common in the iron and steel industry. Our investigation shows that more than 50% of catastrophic process failures in continuous steel casting operation are related to abnormal operations during the process transition period. As a multivariate statistical (MVS) analysis tool, Multi-way PCA (MPCA) is applied in this paper to monitor one important process transition in the...

This paper describes results of a factorial experiment on coal cutting at a traverse speed of 5 meters/min, with water jets at pressures between 500 and 2,000 atmospheres and nozzle diameters in the range from 0.5 to 1 mm. These results fill a gap in the existing results on coal cutting with water jets and form the basis for the design of a coal cutting machine. The interrelationship between pr...

A high-resolution stereoscopic particle image velocimetry (PIV) system was used to conduct three-dimensional measurement of an air jet exhausted from a lobed nozzle. The characteristics of the mixing process in the lobed jet  ow are revealed clearly and quantitatively from the stereoscopic PIV measurement results. The instantaneous velocity and streamwise vorticity distributions revealed that ...

Background: The aim was to unravel how the air-polishing behaves on a titanium surface by evaluating the size and the shape of the cleaned area, influence of the different device settings, and pocket depths and cleaning movements. Methods: 48 titanium SLA surface film-coated discs were treated with an air abrasive system using a subgingival plastic nozzle. Two subgingival models were employed: ...

We designed a specially designed coaxial spinneret in this study. The inner stainless-steel needle was connected to the inner plastic syringe just like the traditional one. The outer stainless-steel needle was replaced by a plastic nozzle, and connected to the outer plastic syringe. The tip of the inner stainless-steel needle was shortened 2 cm from the tip of the outer plastic nozzle. This str...

Article history: Received: 09.06.2015. Received in revised form: 01.10.2015. Accepted: 08.10.2015. Liquid nitrogen is expected to be used as a jet medium in petroleum engineering because of its cryogenic and non-polluting characteristics. To identify the velocity distribution characteristics of liquid nitrogen jet, a computational fluid dynamics model was built by coupling the equations for nit...

Experiments measuring the single-cycle impulse from detonation tubes with nozzles were conducted by hanging the tubes in a ballistic pendulum arrangement within a large tank. The detonation-tube nozzle and surrounding tank were initiallyfilledwith air between 1.4 and 100kPa in pressure simulating high-altitude conditions.A stoichiometric ethylene–oxygen mixture at an initial pressure of 80 kPa ...

Over the years, considerable efforts have been made to study the performance of Submerged Entry Nozzle (SEN) and mould of continuous slab caster. Numerous physical and numerical modelling studies have already been carried out and reported in the literature to study the fluid flow behaviour inside the mould. Based on the extensive literature search, a summary of these is presented here. For the ...

In this research mass transfer coefficient under jetting regime in different directions (from dispersed to continuous and continuous to dispersed phase) has been studied using an experimental setup. n-Butanol-succinic acid-water with low interfacial tension has been selected as experimental chemical system. The effects of various parameters such as jet velocity, nozzle diameter and the heig...