A novel technological approach to space division multiplexing (SDM) based on the use of multiple individual fibers embedded in a common polymer coating material is presented, which is referred to as Multi-Element Fiber (MEF). The approach ensures ultralow crosstalk between spatial channels and allows for cost-effective ways of realizing multi-spatial channel amplification and signal multiplexin...

This paper presents a procedure to determine an element-length dependent strain and stress relation until fracture that is suitable for implementation in finite element models. This material relation is obtained experimentally with an optical measuring system. The strain until fracture is calculated from the measured surface displacements. The stress is derived from the measured force and the c...

Utilizing a ray tracing approach based upon Snell’s optical laws and a 4×4 homogeneous coordinate transformation matrix, this study conducts a systematic analysis of the errors induced in the paths of skew rays as they pass through an optical element with an ellipsoid boundary surface. The error analysis performed in this study considers two principal sources of light path error, namely (1) tra...

Different designs have been presented to achieve high concentration and uniformity for the concentrated photovoltaic (CPV) system. Most of the designs have issues of low efficiency in terms of irradiance uniformity. To this end, we present a design methodology to increase irradiance uniformity over solar cell. The system consists of an eight-fold Fresnel lens as a primary optical element (POE) ...

Nanostructured metasurfaces offer unique capabilities for subwavelength control of optical waves. Based on this potential, a large number of metasurfaces have been proposed recently as alternatives to standard optical elements. In most cases, however, these elements suffer from large chromatic aberrations, thus limiting their usefulness for multiwavelength or broadband applications. Here, in or...

We present measurements of an optomechanical system in which the mechanical element is inside the cavity, and couples dispersively to the intracavity field. This geometry makes it easier to simultaneously achieve high optical finesse and high mechanical quality factor in an optomechanical device. We measured the linear optical properties of a such a device in which the mechanical element is a 5...

Directional light scattering is important in basic research and real applications. This area has been successfully downscaled to wavelength and subwavelength scales with the development of optical antennas, especially single-element nanoantennas. Here, by adding an auxiliary resonant structure to a single-element plasmonic nanoantenna, we show that the highly efficient lowest-order antenna mode...

Different designs have been presented to achieve high concentration and uniformity for the concentrated photovoltaic (CPV) system. Most of the designs have issues of low efficiency in terms of irradiance uniformity. To this end, we present a design methodology to increase irradiance uniformity over solar cell. The system consists of an eight-fold Fresnel lens as a primary optical element (POE) ...

We carry out a complete spatio-temporal characterization of the electric field of an ultrashort laser pulse after passing through a diffractive optical element composed of several binary amplitude concentric rings. Analytical expressions for the total diffraction field in the time and spectral domain are provided, using the Rayleigh-Sommerfeld formulation of the diffraction. These expressions a...

Internally buffered multistage interconnection network (MIN) architectures have been widely used in parallel computer systems and large switching fabrics. Migration from electrical domain to optical domain has raised the necessity of developing node architectures with optical buffers. Cascaded optical delay line (COD) emulates output buffering in a 2x2 switching element. Two versions of COD are...