In this study, activated carbon synthesized from Aloe vera green wastes was used as a sorbent to remove 4-chlorophenol (4-CP) from aqueous solutions. The influence of contact time (0-100 minutes), pH (2-8), adsorbent dosage (1-9 g/l), and initial 4-CP concentration (10-60 mg/l) in batch system was investigated on the sorption. The sorbent was specified using scanning electron microscopy (SEM). ...

The activated sludge process is commonly used to treat wastewater by aerobic oxidation of organic pollutants into carbon dioxide and water. However, several nonoxidative mechanisms can also contribute to removal of organics. Sorption onto activated sludge can remove a large fraction of the colloidal and particulate wastewater organics. Intracellular storage of, e.g., polyhydroxyalkanoates (PHA)...

Introduction: The removal of organic precursors of disinfection byproducts (DBPs), i.e. natural organic matter (NOM), prior to disinfection is considered as the most effective approach to minimise the formation of DBPs. Trihalomethanes (THMs) as the main group of DBPs are categorized and considered to have the potentiality of increasing the rate of liver, kidney and CNS adverse effects. Methods...

Nitrate contamination of water resources and the growing concentration of nitrate endanger human health and the environment and considering its reduction strategies from water resources is important. The aim of this study was to investigate the possibility of removal of nitrate from aqueous solutions using granular activated carbon from grape wood coated with iron nanoparticles. The results sho...

In this work, a low-cost activated carbon as well as non-hazardous material, with high adsorption capacity, was prepared from Melia azedarach fruit (MF) by ZnCl2 activation for the removal of Pb(II) toxic metal from aqueous solutions. The microstructure of the activated carbon was observed by Scanning Electron Microscopy (SEM). Batch experiments have been performed as a function of pH, contact ...

The present study aims at investigating the potential of activated carbon AC prepared from waste cotton fiber for the removal of Acid Dyes from aqueous solutions. The prepared activated carbon was characterized by pore structure analysis, Fourier transforms infrared spectroscopy FTIR. Batch adsorption studies were carried out and the effect of experimental parameters such as pH, initial dye con...

Activated carbon has many applications in the environment, cosmetology, medicine and industry. The surface of each activated can be modified to obtain desired adsorption properties. Chemical activation greatly affect efficiency, control activity application carbon. aim study was modify selected by chemical physical methods, while maintaining these parameters so that it could used medicine. Powd...

In this study we compared three methods for the treatment of electroplating sludge highly loaded with zinc and iron: (1) calcium oxide-based solidification/stabilisation; (2) conversion into inert material by adsorption of organic and inorganic pollutants onto activated carbon; and (3) conversion of mobile waste components into insoluble phosphates. All three methods proved highly efficient in ...

Using internal carbon source contained in waste activated sludge (WAS) is beneficial for nitrogen removal from wastewater with low carbon/nitrogen ratio, but it is usually limited by sludge disintegration. This study presented a novel strategy based on free nitrous acid (FNA) pretreatment to intensify the release of organic matters from WAS for enhanced denitrification. During FNA pretreatment,...