The cycle life of LiNi1/3Co1/3Mn1/3O2 (NMC) based cells are significantly influenced by the choice of the negative electrode. Electrochemical testing and post mortem surface analysis are here used to investigate NMC electrodes cycled vs. either Li-metal, graphite or Li4Ti5O12 (LTO) as negative electrodes. While NMC-LTO and NMC-graphite cells show small capacity fading over 200 cycles, NMC-Li-me...

a simple, precise, rapid and low-cost potentiometric method for diclofenac determination in pharmaceuticals is proposed. a new diclofenac-sensitive electrode was constructed by incorporating the diclofenac ion pair complex with butyl rhodamine b into graphite matrix. the electrode exhibited a linear response over the concentration range of 1 × 10-4 – 5 × 10-2 mol l-1, a detection limit of 3.9×1...

for the first time this study reported the success of using nanocrystalline hexagonal close-packed (hcp) nickel (ni) modified composite graphite (cg) electrode (hcp-nano ni/cg) for the electrocatalytic oxidation of glycerol in alkaline medium (0.1 m koh). the hcp-nano ni/cg electrode had an improve response and specificity on the electrocatalytic oxidation of glycerol over the bare cg. the elec...

Carbon nanotubes uniformly 50 nm in diameter were directly grown on graphite foil. Cyclic voltammetry (CV) shows that the carbon nanotube /graphite foil electrode has a high specific capacitance (115.7 F/g at a scan rate of 100 mV/s) and exhibits typical double-layer behavior. A rectangular-shaped CV curve persists even at a scan rate of 100 mV/s in 1.0 M H SO aqueous solution, which suggests t...

A novel potentiometric, enantioselective membrane electrode based on graphite paste (graphite powder and paraffin oil), impregnated with 10–3 mol/L 2-hydroxy-3-trimethylammoniopropyl-β-cyclodextrin (as chloride salt) solution, has been constructed. The potentiometric, enantioselective membrane electrode can be used for the reliable assay of S-enalapril as raw material and from its pharmaceutica...

Edged plane pyrolytic graphite electrode (EPPGE) was modified with and without Prussian blue (PB) nanoparticles and polyaminobenzene sulphonated single-walled carbon nanotubes (SWCNTPABS) using the chemical deposition method. The electrodes were characterised using microscopy, spectroscopy and electrochemical techniques. Results showed that edged plane pyrolytic graphite-single-walled carbon na...

carbon nanotubes are regarded as promising building blocks for the construction of novel biosensors due to their unique properties like fast electron transfer, high electrocatalytic effect and good biocompatibility. in the present study, the effect of different chemical oxidation’s methods of multi-walled carbon nanotubes (mwcnts) on the electrochemical behavior of modified graphite electrodes ...