Lignocellulosic fibers have received much more attention than ever before from the research community all over the world during the past few years because of their enormous advantages. A study on the preparation of new series of polymer composites using Pine Needles as a reinforcing material in Urea Formaldehyde resin has been made. Mechanical properties of intimately mixed particle reinforced ...

Magnetite nanoparticles combined with polymers produce white-light emission under multiphoton laser irradiation. Understanding the photonic reaction in magnetite-polymer composites is critical for application of magnetite NPs as photothermal agents. Laser irradiated magnetite nanoparticle-poly(methyl methacrylate) (PMMA) composites exhibit fluorescence due to the carbon double-bond formation re...

The mechanical properties of polymer composites, reinforced with silica-coated multiwall carbon nanotubes (MWNTs), have been studied using the nanoindentation technique. The hardness and the Young's modulus have been found to increase strongly with the increasing content of these nanotubes in the polymer matrix. Similar experiments conducted on thin films containing MWNTs, but without a silica ...

In the present work, we have investigated the concentration dependences of electrical conductivity of monopolymer composites with graphite nanoplatelets or multiwall carbon nanotubes and hybrid composites with both multiwall carbon nanotubes and graphite nanoplatelets. The latter filler was added to given systems in content of 0.24 vol%. The content of multiwall carbon nanotubes is varied from ...

Stress corrosion experiments were performed on unidirectional ECR-glass/polymer composites with the modified polyester, epoxy and vinyl ester resins for the use in high voltage composite insulator applications. Two types of ECR-glass fibers with low and high seed counts were investigated. The stress corrosion tests were performed in nitric acid under four point bending conditions and the resist...

Composites of recycled high-density polyethylene and micro fibres of sugarcane bagasse were studied, in order to create an upcycled material to produce masonry bricks. We ranged the polymer/filler ratio from 100–0 to 60%–40%. The materials were assessed through scanning electron microscopy, thermogravimetry/derivative thermogravimetry, differential scanning calorimetry, rheological measurements...

Many metallic structural and non-structural parts used in the transportation industry can be replaced by textile-reinforced composites. Composites made from a polymeric matrix and fibrous reinforcement have been increasingly studied during the last decade. On the other hand, the fast development of smart textile structures seems to be a very promising solution for in situ structural health moni...

zinc oxide nanoparticles have been synthesized by chemical reaction method.  polyvinyl alcohol (pva) composite film filled with nanometric, monodispersed zinc oxide nano particles prepared by pva solution and nanozinc oxide. polymer blend with zno nanoparticle composite film has prepared by casting technique.  the property of nano composites depends greatly on the chemistry of polymer matrices....

Blends of biodegradable polymers, poly(caprolactone) and poly(D, L-lactic-co-glycolic acid), have been examined as scaffolds for applications in bone tissue engineering. Hydroxyapatite granules have been incorporated into the blends and porous discs were prepared. Mechanical properties and degradation rates in vitro of the composites were determined. The discs were seeded with rabbit bone marro...

Conductive polymer composites require a three-dimensional 3D network to impart electrical conductivity. A general method that is applicable to most polymers for achieving a desirable graphene 3D network is still a challenge. We have developed a facile technique to fabricate highly electrical conductive composite using vacuum-assisted infusion of epoxy into graphene sponge GS scaffold. Macroscop...