A solidification/stabilisation (S/S) process of washed municipal incinerator fly ash with Portland cement was used to manufacture solidified products with high ash content (55 and 70 wt.% of solids) and good performance characteristics in terms of setting, dimensional stability, compressive strength, and environmental quality. The S/S product containing 70 wt.% fly ash aged for 180 days at 20°C...

The MgO granulated ground blast-furnace slag (GGBS) binder, as a novel has gained increasing attention in recent decades stabilization/solidification (S/S) to treat contaminated soils. In this study, the physical strength and leaching performance of an MgO-GGBS (MG) binder was examined compared with (PC) portland cement PC fly ash (PF) regarding S/S treatment dimethyl phthalates (PAE) soil afte...

At present, sustainability is of major importance in the cement industry, and the use of additions such as silica fume as clinker replacement contributes towards that goal. Special foundations, and particularly micropiles, are one of the most suitable areas for the use of sustainable cements. The aim of this research is to analyse the effects in the very long-term (for 600 days) produced by sul...

This paper investigates the physicomechanical properties of mortar containing high volume of fly ash (FA) as partial replacement of cement in presence of copolymer latexes. Portland cement (PC) was partially replaced with 0, 10, 20, 30 50, and 60% FA. Copolymer latexes were used based on 2-hydroxyethyl acrylate (2-HEA) and 2-hydroxymethylacrylate (2-HEMA). Testing included workability, setting ...

7 We propose a new method to estimate the initial cement content, water content and free water/cement ratio (w/c) 8 of hardened cement-based materials made with Portland cements that have unknown mixture proportions and 9 degree of hydration. This method first quantifies the composition of the hardened cement paste, i.e. the 10 volumetric fractions of capillary pores, hydration products and unr...

Using the agar diffusion method, we conducted an in vitro study to evaluate the antimicrobial activity of mineral trioxide aggregate (MTA), new endodontic cement (NEC) and Portland cement at different concentrations against five different microorganisms. A base layer was made using Muller-Hinton agar for Escherichia coli (ATCC 10538) and Candida (ATCC 10231). For Actinomyces viscosus (ATCC 1598...

Dental materials based on Portland cement, which is used in the construction industry have gained popularity for clinical use due to their hydraulic properties, the interaction with tooth tissue and their antimicrobial properties. The antimicrobial properties are optimal in vitro. However in clinical use contact with blood may affect the antimicrobial properties. This study aims to assess wheth...

The objective of this paper is to examine the possible use of new blended cements containing calcareous fly ash in structural concrete, potentially adequate for structural elements of nuclear power plants. The investigation included five new cements made with different contents of non-clinker constituents: calcareous fly ash, siliceous fly ash, ground granulated blastfurnace slag, and a referen...

Abstract This work was focused on evaluating the suitability of replacing Portland cement (PC) by 5, 10 and 15 mass % activated alum sludge waste (AAS) as a pozzolanic material. Exploitation low-cost nanocomposite for bolstering physical, mechanical, stability against firing PC–AAS-hardened composites inspected. CuFe 2 O 4 spinel nanoparticle with average particle size (~ 50 nm) prepared. Inclu...

AIM To investigate the discoloration potential of endodontic materials using a bovine tooth model. METHODOLOGY Two hundred and 10 dentine-enamel cuboid blocks (10 × 10 × 3.5 mm) were prepared out of the middle thirds of bovine tooth crowns. Standardized cavities were prepared in the walls of the pulp chamber leaving 2 mm of enamel and dentine on the labial wall of the crown. The specimens wer...