A highly-integrated experimental system for plasma decomposition of fuels was built. Experiments were conducted and confirmed that macromolecular chain hydrocarbons were cracked by large-gap dielectric barrier discharge under the excitation of a microsecond-pulse power supply. Alkanes and olefins with a C atom number smaller than 10 as well as hydrogen were found in the cracked products of n-de...

In this work, closed-form expressions for the buckling loads of a weakened column with different boundary conditions are presented. The cracked-column model is based on the well-known method consisting of dividing the column into two segments connected by a rotational linear spring whose flexibility is related to the crack size and the geometry of the cross section. For the formulation of close...

Thisstudy presents axially forced vibration of a cracked nanorod under harmonic external dynamically load. In constitutive equation of problem, the nonlocal elasticity theory is used. The Crack is modelled as an axial spring in the crack section. In the axial spring model, the nonrod separates two sub-nanorods and the flexibility of the axial spring represents the effect of the crack. Boundary ...

Occurrence of top down and bottom up fatigue cracking in asphaltic pavements is common. Conventional pavement analysis methods ignore the existence of cracks in asphaltic layers. However, it seems that the responses of cracked pavement would not be the same as a pavement without crack. This paper describes effects of crack type, position and length, and vehicles tire inflation pressure and axle...

This research investigated the self-healing potential of early age cracks in cement-based materials incorporating the bacteria which can produce carbonic anhydrase. Cement-based materials specimens were pre-cracked at the age of 7, 14, 28, 60 days to study the repair ability influenced by cracking time, the width of cracks were between 0.1 and 1.0 mm to study the healing rate influenced by widt...

Some research works report the relationships between transformation toughening and process zone. In SUS304, reduction of at high strain rate is expected from result a small punch test. Currently, zone in SUS304 fuzzily defined. Therefore, consideration damaging necessary order to understand fracture mechanism associated with this study, first, tensile tests pre-cracked sheet specimens made are ...

Three techniques for measuring dynamic stress intensity factor time histories of dynamically loaded stationary modeI cracks are compared as applied to dynamically loaded pre-cracked 6Al–4V titanium alloy specimens. The three techniques are crack opening displacement (COD), dynamic strain gage measurement, and coherent gradient sensing (CGS). The stress intensity factor histories are inferred fr...

An observed minimum in the critical crack initiation load at Poisson’s ratio (ν) of 0.21–0.22 in Na2O–TiO2–SiO2 glasses was investigated. Vickers indentation was used to examine hardness and average cracking length, fracture toughness was measured through the single-edge pre-cracked beam method, and volumes of densification and shear flow around indents were measured using atomic force microsco...

This paper deals with the application of Cohesive Zone Model (CZM) concepts to study mode I fracture in adhesive bonded joints. In particular, an intrinsic piece-wise linear cohesive surface relation is used in order to model fracture in a pre-cracked bonded Double Cantilever Beam (DCB) specimen. Finite element implementation of the CZM is accomplished by means of the user element (UEL) feature...

Cracks in concrete generally interconnect flow paths and increase concrete permeability. The increase in concrete permeability due to the progression of cracks allows more water or aggressive chemical ions to penetrate into the concrete, facilitating deterioration. The present work studies the relationship between crack characteristics and concrete permeability. In this study, feedback controll...