The possibility to obtain multiphase steels with considerable fractions of retained austenite, which is of key interest for the occurrence of the TRIP effect, is investigated in steels with low amounts of Si and Al. Special emphasis is dedicated to the microstructural observation of this phase, since its volume fraction, distribution and stability, related to the carbon content, will determine ...

Displacive transformations involve the disciplined motion of atoms. As a result, there are clearly defined relationships between all aspects of the parent and product lattices. The theory for this is well established but has not been exploited in the calculation of transformation textures. This paper is a critical assessment of the methods for the estimation of crystallographic textures during ...

Nanostructured bainite was obtained in high-carbon Si-Al-rich steel by low-temperature (220-260 °C) isothermal transformation after austenitisation at different temperatures (900 °C, 1000 °C, and 1150 °C). Improved strength-ductility-toughness balance was achieved in the nanostructured bainitic steel austenitised at low temperatures (900 °C and 1000 °C). Increasing the austenitising temperature...

Depending on the starting equilibrium temperature, the application of a magnetic field on a sample of Ni–Mn–Sn produces sample heating or cooling during adiabatic experiments. The competition between endothermal and exothermal effects is observed close to the martensite-to-austenite magnetostructural phase transition. A model assuming the coexistence of two phases and a field dependence of thei...

The microstructure of 8 mm diameter wire produced by the severe deformation of 316L austenitic stainless steel has been examined using TEM and X-ray diffraction. The deformation imparted amounts to a true strain of 6.3. Data from previous studies on strain induced transformation of this steel have been combined with new results to show that true strains .2 are required in order to observe mecha...

Susceptibility of three lean-alloyed ferritic-austenitic stainless steels to hydrogen-induced delayed cracking was examined, concentrating on internal hydrogen contained in the materials after production operations. The aim was to study the role of strain-induced austenite to martensite transformation in the delayed cracking susceptibility. According to the conducted deep drawing tests and cons...

The work reports an experimental observation on crystal rotation in a duplex (austenite + ferrite) steel induced by the electropulsing treatment at ambient temperature, while the temperature rising due to ohmic heating in the treatment was negligible. The results demonstrate that electric current pulses are able to dissolve the initial material's texture that has been formed in prior thermomech...

in the present study, the effect of grain size on the austenite stability was studied by nanoindentationtests in a 304l stainless steel. thermomechanical processing based on cold rolling and annealing wasused to produce two different types of austenite: ultrafine grained (ufg) austenite with the averagegrain size of 0.65 μm and coarse grained (cg) austenite with the average grain size of 12 μm....

The microstructure and mechanical properties of Zr48Cu48 - x Al4M x (M ≡ Fe or Co, x = 0, 0.5, 1 at.%) metallic glass (MG) composites are highly dependent on the amount of Fe or Co added as microalloying elements in the parent Zr48Cu48Al4 material. Addition of Fe and Co promotes the transformation from austenite to martensite during the course of nanoindentation or compression experiments, resu...