The slagging and fouling characteristics of the heat recovery steam generator (HRSG) for ferrosilicon electric furnaces are discussed in this paper. Three ash samples were taken from the HRSG of a ferrosilicon furnace in Ningxia Province, China, which suffered from serious slagging and fouling. X-ray fluorescence (XRF), X-ray powder diffraction (XRD) and scanning electron microscope (SEM) were ...

Stabilisation of natural pavement materials to make road pavements is widespread in South Africa, using cement and lime as cementitious binders. The rapid speed of the cementing reaction limits these to plant based construction. Some hydraulic binders have the potential to be developed for Labour Intensive Construction stabilisation technology because their slow hydration reaction allows time t...

Slags are the final solid wastes from the steel industry. Their production from waste and associated materials is a proper implementation of the basic objectives and principles of the waste management. This study aims to investigate the chemical and selected significant geotechnical parameters of steel slag as the alternative materials used in road construction. These investigations are strongl...

The construction industry is the largest consumer of natural resources which led to depletion of good quality natural sand (Fine aggregates). This situation led us to explore alternative materials and granular slag a waste industrial byproduct is one such material identified for utilization it as replacement of natural sand. This paper highlights upon the feasibility study for the utilization o...

Most approaches to grasp planning assume that the configurations of the object to be grasped and any potential obstacles are known perfectly. As a result, implementations of these “perfect information” approaches to grasp synthesis are necessarily preceded by a perception stage where the the state of the object and obstacles are estimated. Unfortunately, small perceptual errors during the perce...

The corrosion behavior of three sorts of refractories based on alumina-graphite were studied by immersion tests. The melts included smelting reduction molten slag and corresponding carbon saturated molten iron. The influence of test temperature, FeO content in slag and specimen rotative velocity on the corrosion rate of refractories was examined. By means of SEM and EDS, the microstructure chan...

We aimed to study the characteristics and the mechanism of the cumulative release of antimony at an antimony smelting slag stacking area in southern China. A series of dynamic and static leaching experiments to simulate the effects of rainfall were carried out. The results showed that the release of antimony from smelting slag increased with a decrease in the solid-liquid ratio, and the maximum...

Issue: Processed recycled glass has been sold as an abrasive blasting medium under several brand names in different parts of the United States. However, limited public information is available regarding the performance of finely sized crushed glass in abrasive applications because manufacturers have developed their own proprietary data. Historically, the predominant material used for abrasive b...

During incineration of municipal solid waste (MSW), various environmentally harmful elements and heavy metals are liberated either into bottom ash, or carried away with the off-gases and subsequently trapped in f ly­ ash. If these minor but harmf itl elements are not properly isolated and immobilized, it can lead to secondary environmental pol/ution to the air, soil and water. The stricter envi...

Utilisation of fly ash and Ground Granulated Blast Slag as an alternative material in concrete reduces the use of OPC in concrete. Evolution of geopolymer concrete cured at ambient temperature broadens its suitability and applicability to concrete based structures. This paper presents the mix proportions and outcome of an experimental study on the density and compressive strength of geopolymer ...