Objectives: The purpose of this study was to analyze, with the aid of scanning electron microscopy (SEM), the chemical and structural changes in metal brackets subjected to an in vitro biodegradation process. Methods: The sample was divided into three groups according to brackets commercial brand names, i.e., Group A = Dyna-Lock, 3M/Unitek (AISI 303) and Group B = LG standard edgewise, American...

Microlubrication minimizes the exposure of metal working fluids (MWFs) leading to an economical, safer and healthy workplace environment. In this study vegetable based lubricant is used to conduct wear analysis during end milling AISI 1018 steel using microlubrication. Solid carbide cutting tool was used with varying cutting speed and feed rate having a constant depth of cut. A full factorial e...

An experimental model was proposed to study biofilm formation by Listeria monocytogenes ATCC 19117 on AISI 304 (#4) stainless steel surface and biotransfer potential during this process. In this model, biofilm formation was conducted on the surface of stainless steel coupons, set on a stainless steel base with 4 divisions, each one supporting 21 coupons. Trypic Soy Broth was used as bacterial g...

In the present study, the Weldability and microstructure of dissimilar welds of AISI 347austenitic stainless steel to ASTM A335 low alloy steel was investigated. For this purpose, gas tungsten arc welding process and two filler metals including ERNICr-3 and ER309L were used. After welding, the microstructure of the different zones of each joint, including weld metals, heat affected zone (HAZ) 1...

Flash processing is a new heat treatment process being developed to produce steel with relatively high strength and ductility. It involves rapidly heating steel sheet or strip to a temperature in the austenite range and quenching; the entire thermal cycle takes place within 15 seconds. The resulting microstructure is fine and difficult to resolve using standard metallographic techniques. In thi...

Article history: Received 12 September 2010 Accepted 27 September 2010 In this paper, the residual stress in quenched AISI 1045 steel was measured by a recently developed nanoindentation technique. Depth control mode was adopted to measure the residual stress. It was found that residual compressive stress was generated in the quenched steel. The material around nanoindents exhibits significant ...

Warm laser shock peening (WLSP) is a thermomechanical treatment technique combining the advantages of laser shock peening and dynamic strain aging (DSA). Through DSA, WLSP of steel increases the dislocation density and stabilizes the dislocation structure by pinning of mobile dislocations by carbon atoms. In addition, WLSP generates nanoscale carbide precipitates through strain-induced precipit...

Angle sections are commonly designed to bear only axial force, usually neglecting the additional bending moments resulting from the eccentric connection and the shift of the effective centroid. The current work deals with the capacity of single-bolted equal angle sections made from cold-formed steel. The experimental investigation presented herein includes tension and compression tests that sub...

Metal cutting is a severe plastic deformation process involving large strains, high strain rates, and high temperatures. Conventional analysis of the chip formation process is based on bulk material deformation disregarding the inhomogeneous nature of the material microstructure. A series of orthogonal cutting tests of AISI 1045 and 1144 steel were conducted which yielded similar process charac...

Modulus of elasticity of flapper valve material is an important parameter for compressor design since it can affect efficiency and life time of the compressor. Modulus of elasticity is usually considered as a material constant. Actually, it can vary with material orientations and conditions and even environments such as temperature will also affect this value. Therefore, the parameters that can...