In this study, the microstructural, mechanical, adhesion, and hemocompatibility properties of nanocrystalline diamond coatings were examined. Microwave plasma chemical vapor deposition (MPCVD) was used to deposit nanocrystalline diamond coatings on silicon (100) substrates. The coating surface consisted of faceted nodules, which exhibited a relatively wide size distribution and an average size ...

This article presents an investigation of antiadhesive coatings for nanoimprinting lithography. To get the optimum parameters of the coating process, a surface-contact angle goniometer and an atomic force microscope were used for detailed comparison of the coated surfaces produced with different process parameters. With the antiadhesive coating, the contact angle of deionized water on the mold ...

In this paper, rotating bending fatigue tests of 2024-T4 Al alloy with different oxide coatings were carried out. Compared to the uncoated and previously reported oxide coatings of aluminum alloys, the fatigue strength is able to be enhanced by using a novel oxide coating with sealing pore technology. These results indicate that the better the coating surface quality is, the more excellent the ...

A discotic liquid crystal (DLC), HBC-C12, coating was successfully applied to improve the corrosion resistance of an iron surface. The iron surface with the DLC-coating exhibited improved corrosion resistance in various environments, including exposure to air and solutions with different pH values. To the best of our knowledge, studies regarding corrosion protection using DLCs have never been r...

This paper presents an experimental platform which is used to study the effect of DLC coating on surface roughness. Variety of experiments is conducted and the effect of variation of the coating process parameters and type and combination of sub layers on the surface roughness of the coated part is discussed.

This work is investigating the chemical grafting on Ti surface of a polymer/calcium phosphate coating of improved adhesion for enhanced bioactivity. For this purpose, a whole new methodology was developed based on covalently attaching a hyperbranched poly(ethylene imine) layer on Ti surface able to promote calcium phosphate formation in a next deposition stage. This was achieved through an inte...

An Ni2Al3 coating was prepared via the electrodeposition of nickel followed by pack aluminization. Polarization curve and electrochemical impedance spectroscopy were performed to study the room temperature corrosion behavior of the coating in a 3.5 wt. % NaCl solution. The long-term impedance of the coating was also investigated after immersion for 30 days. Results show that the Ni2Al3 coating ...

The simulation of plane impinging jets using the Lagrangian technique of smooth particle hydrodynamics is presented. In Section 1 the impingement of a plane jet onto a stationary surface is considered for Reynolds numbers 800, 4000, 8000 and Froude number 4. For each case, the height of the associated streams is measured and compared with both experimental and theoretical results. The agreement...

Step 2 Phosphating The metal is treated with phosphoric acid, leading to the following two reactions occuring in the zinc-rich surface of the steel: 2H3PO4 + 3Zn → 3H2 + Zn3(PO4)2 2H3PO4 + Fe + 2Zn → 3H2 + FeZn2(PO4)2 This gives a mixture of zinc phosphates. The electrocoat paint binds better to these zinc phosphates than to the steel alone, and the zinc phosphates corrode much slower than the ...

Polydopamine (PDA) prepared in the form of a layer of polymerized dopamine (DA) in a weak alkaline solution has been used as a versatile biomimetic surface modifier as well as a broadly used immobilizing macromolecule. This review mainly discusses the progress of biomaterial surface modification inspired by the participation of PDA in bone tissue engineering. A comparison between PDA-assisted c...