Friction welding of cast Fe-40Al alloy was carried out at 1000 rmp for various friction times, friction pressures, and forging pressures. The microstructures of the interface of welded samples were analyzed by optical and scanning electron microscopy (SEM). Micrographs demonstrated that excellent welding formed continuously along the interface, except for samples welded for 3 s. Chemical compos...

The fatigue fracture of structural details subjected to cyclic loads mostly occurs at a critical cross section with stress concentration. The welded joint is particularly dangerous location because of sinergetic harmful effects of stress concentration, tensile residual stresses, deffects, microstructural heterogeneity. Because of these reasons many methods for improving the fatigue resistance o...

The presented work is aimed at the evaluation of cold bending capacity high-borated austenitic stainless steel sheets. Due to their excellent neutron-absorbing capability, borated steels belong group tailor-made structural materials widely used for vertical storage baskets holding spent nuclear fuel assemblies in cooling pools dry or wet facilities. basket consists individual assembly cells. Ea...

This study investigated the joint properties of Fe-Pt alloy laser-welded to Co-Cr alloy. Cast plates (0.5 x 3.0 x 10 mm) were prepared with Fe-Pt and Co-Cr alloys. Fe-Pt plates were butted against Co-Cr plates and laser-welded using Nd:YAG laser. Control and homogeneously welded specimens were also prepared. Laser welding was performed with and without argon shielding. Tensile testing was condu...

As a new treatment process after welding, the process parameters of laser shock peening (LSP) in dynamic strain aging (DSA) temperature regimes can be precisely controlled, and the process is a non-contact one. The effects of LSP at elevated temperatures on the distribution of the surface residual stress of AA6061-T6 welded joints were investigated by using X-ray diffraction technology with the...

In this study, 7075 aluminum alloy with a thickness of 10 mm was successfully welded with no obvious defects by pulsed variable polarity plasma arc (PVPPA) welding. The mechanical properties of PVPPA welded joints have been researched by post weld heat treatment (PWHT). The results indicate that the heat treatment strongly affects the mechanical properties of the welded joints. The tensile stre...

Ultrasonic peening treatment (UPT) as a method of severe plastic deformation was used to treat cruciform welded joints of Q345 steel. The application of UPT achieves material surface nanocrystallization of the peening zone, reduces stress concentration, and produces residual compressive stresses at the welded toe. Micro-structure, hardness, stress relief, S-N curve, and the fatigue fracture mec...

NONE of us could imagine delivering an inhalational anesthetic in the absence of oxygen. It wasn’t always that way. In this issue of ANESTHESIOLOGY, George S. Bause, M.D., presents the unlikely history behind the recognition that specialized equipment is necessary to deliver both oxygen and anesthetics in a controlled manner. This article and its attendant cover image provide a platform for int...

Introduction. Friction stir welding is widely used due to certain advantages of this method. Factors that reduce the strength joints made high-strength aluminum alloys are considered. When flat sheets, an effective way increase weld edge thickening. The paper proposes a method for such A device developed, calculations and experiments carried out. Materials Methods. Laboratory equipment has been...

Linoleic, oleic, and stearic fatty acids, presented vapor-phase retronasally, were discriminable from blanks and each other, but the same concentrations, oral-cavity-only (OCO), were not discriminable from blanks. It remained possible that higher concentrations might be discriminable OCO. To evaluate this, participants attempted to discriminate undiluted linoleic, oleic, or stearic acids, vapor...