The scale dependence of the strength of virtually homogeneous rock is usually considered to be insignificant but the spectrum of discontinuities plays a very important role for the strength of differently sized rock elements and also controls the rock creep strain. Large-scale load tests comprised recording of the creep strain rate that was found to be strongly retarded and negligible for stres...

For high stress levels, the dependence of creep strain rate concrete on acting is nonlinear. Furthermore, very levels may lead to a critical growth microcracks resulting in material failure. lifetime assessment sensitive structures by means numerical simulations, realistic description nonlinear crucial. However, many models are formulated for either time-independent behavior, or time-dependent ...

Devices in modern technologies often have complex architectures, dissimilar materials, and small features. Their long-term reliability relates to inelastic, time-dependent mechanical behavior of such structures. This paper analyzes a three-layer structure consisting of, from top to bottom, an elastic film, a power-law creep underlayer, and a rigid substrate. The layers are bonded. Initially, th...

The wall-yielding properties of cell walls were examined using frozen-thawed and pressed segments (FTPs) obtained from the elongation zones of cucumber hypocotyls with a newly developed programmable creep meter. The rate of wall extension characteristically changed depending on both tension and pH. By treatment of the FTPs with acid, the yield tension (y) was shifted downward and the extensibil...

Keywords: Rockfill creep Particle mechanics method Water weakening Wetting–drying cycles Particle breakage Abrasion a b s t r a c t Rockfill is an important construction material for infrastructure engineering, such as dams, railways and airport foundations, which display a long-term post-construction settlement. However, the main mechanisms for rockfill creep and weathering influence still rem...

Fibre reinforced concretes (FRCs) are composite materials now largely adopted in structural applications given their mechanical properties terms of the residual tensile strength, almost absent for plain concrete. The short-term behaviour these material has been deeply studied, while time-dependent deformations have received less attention from scientific community. present paper presents experi...

Creep strain experiments on uncemented reservoir sands suggest that the time-dependent component of deformation can be modeled using linear viscoelasticity theory. The standard approach to solving for the values of the appropriate model parameters is to fit creep strain data as a function of time. However, by writing the creep compliance function in terms of strain-rate rather than strain, it i...

In this article, experimental results on the effect of CO2 sorption and desorption on the creep response of polycarbonate (PC) are presented. Tensile specimens machined from PC sheets were exposed to CO2 and the absorbed gas mass fraction ranged from 0.045 to 0.12. The creep/creep recovery response of as-received PC, saturated PC, and saturation-cycled PC was characterized. It was found that th...

Experimental measurements and modeling predictions were obtained to characterize the electro-mechanical response of two different gold contact radio frequency microelectromechanical system (RF MEMS) switches due to variations in the temperature and applied contact voltage. A three-dimensional surface roughness profile from AFM measurements of the top contact surface of a sample RF MEMS switch w...

Na-loading single frog atrial cells produce changes in membrane currents that are similar to the creep currents originally observed in Na-loaded cardiac Purkinje fibers. Exposure to the Na ionophore, monensin, was used to induce creep currents in isolated atrial cells. The sensitivity of myocardial creep currents to three compounds that have been shown to be inhibitors of Na-Ca exchange flux ac...